In general, Microsoft says you cannot skip major releases, so you can't go from 2.1 to 3.0 (skipping 2.5), or 2.5 to 4.0 (skipping 3.0), but unless there is something mentioned in the service pack documentation you should be able to migrate to the newest service pack of the next higher release. As a customer or VAR, I would be sorely angry if Microsoft came out with a service pack that made such major changes that I had to do a double upgrade within a major release. Due to the difference of the responses, I recommend you check with Microsoft.
Jim Chwaszczewski
-----------------------------
Message: 6
Date: Mon, 20 Mar 2006 09:14:58 +0100
From: "Askeryd Thomas" <[EMAIL PROTECTED]>
Subject: SV: Digest Number 1706
You can not go to SP4 directly. MS should have a spec. somewhere which packs are milestones or what to call them.
Thomas.
________________________________
Från: development-axapta@yahoogroups.com genom James Flavell
Skickat: fr 2006-03-17 01:53
Till: development-axapta@yahoogroups.com
Ämne: RE: [development-axapta] Digest Number 1706
Hi Jim,
Can you confirm you can go from 2.5 to 3.0SP4 directly (i.e. just run the
Sp4 installation etc). I was always under the impression we had to upgrade
to 3.0SP0 first.
Just want to check as I am doing such an upgrade in the near future
Thanks
James
-----Original Message-----
From: development-axapta@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Chwaszczewski, Jim
Sent: 16 March 2006 02:11
To: development-axapta@yahoogroups.com
Subject: RE: [development-axapta] Digest Number 1706
You can upgrade directly to 3.0 SP4 from 2.5. Number sequence references in
3.0 must be unique. A number sequence can only be used once. You need to
clean up number sequence references in 2.5 before the upgrade. It's one of
those architectural changes they don't tell you about.
Jim Chwaszczewski
[EMAIL PROTECTED] --------------------------------------------------------
The content of this e-mail and any attached files is confidential, and may be subject
to certain privilege. This e-mail is intended for the designated recipient(s) only.
If you have received this e-mail in error, please immediately contact the sender.
Pursuant to Treasury Circular 230, the IRS requires us to advise you that if this e-mail (or any attachment) contains advice concerning any federal tax issue, it was not written or intended to be used, and may not be used, for the purpose of avoiding federal tax penalties.
WIPFLI LLP
Business experts. Right from the start.
--------------------------------------------------------
SPONSORED LINKS
| Computer part | Programming languages | Microsoft axapta |
| Support exchange |
YAHOO! GROUPS LINKS
- Visit your group "development-axapta" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
