start Axapta...rather just apply SP5.
So basically each version is a milestone I would say
Interesting as it sounds like you say you have not taken this approach but
gone directly to the service pack...I am just wondering does that not mean
your SYS layer is actually a 2.5 version? In theory the SP should only
bring in a SYP layer....
Interesting....
Thanks
James
-----Original Message-----
From: development-axapta@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Chwaszczewski, Jim
Sent: 22 March 2006 02:35
To: development-axapta@yahoogroups.com
Subject: RE: [development-axapta] Digest Number 1713
I've not seen anything from Microsoft saying that you must migrate to 3.0
before migrating to SP4. You'll have to check with them since I could be
wrong. However, I've done 3 upgrades from 2.5 to SP3 in the past 6 months
and I'm working on a 4th to SP4. There are some hotfixes that were issued
for SP3 that had jobs to run in addition to the upgrade. The developers
made a royal mess of inventory.
In general, Microsoft says you cannot skip major releases, so you can't go
from 2.1 to 3.0 (skipping 2.5), or 2.5 to 4.0 (skipping 3.0), but unless
there is something mentioned in the service pack documentation you should be
able to migrate to the newest service pack of the next higher release. As a
customer or VAR, I would be sorely angry if Microsoft came out with a
service pack that made such major changes that I had to do a double upgrade
within a major release. Due to the difference of the responses, I recommend
you check with Microsoft.
Jim Chwaszczewski
-----------------------------
Message: 6
Date: Mon, 20 Mar 2006 09:14:58 +0100
From: "Askeryd Thomas" <[EMAIL PROTECTED]>
Subject: SV: Digest Number 1706
You can not go to SP4 directly. MS should have a spec. somewhere which packs
are milestones or what to call them.
Thomas.
________________________________
Från: development-axapta@yahoogroups.com genom James Flavell
Skickat: fr 2006-03-17 01:53
Till: development-axapta@yahoogroups.com
Ämne: RE: [development-axapta] Digest Number 1706
Hi Jim,
Can you confirm you can go from 2.5 to 3.0SP4 directly (i.e. just run the
Sp4 installation etc). I was always under the impression we had to upgrade
to 3.0SP0 first.
Just want to check as I am doing such an upgrade in the near future
Thanks
James
-----Original Message-----
From: development-axapta@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Chwaszczewski, Jim
Sent: 16 March 2006 02:11
To: development-axapta@yahoogroups.com
Subject: RE: [development-axapta] Digest Number 1706
You can upgrade directly to 3.0 SP4 from 2.5. Number sequence references in
3.0 must be unique. A number sequence can only be used once. You need to
clean up number sequence references in 2.5 before the upgrade. It's one of
those architectural changes they don't tell you about.
Jim Chwaszczewski
[EMAIL PROTECTED]
--------------------------------------------------------
The content of this e-mail and any attached files is confidential, and may
be subject
to certain privilege. This e-mail is intended for the designated
recipient(s) only.
If you have received this e-mail in error, please immediately contact the
sender.
Pursuant to Treasury Circular 230, the IRS requires us to advise you that if
this e-mail (or any attachment) contains advice concerning any federal tax
issue, it was not written or intended to be used, and may not be used, for
the purpose of avoiding federal tax penalties.
WIPFLI LLP
Business experts. Right from the start.
--------------------------------------------------------
SPONSORED LINKS
Computer
<http://groups.yahoo.com/gads?t=ms&k=Computer+part&w1=Computer+part&w2=Progr
amming+languages&w3=Microsoft+axapta&w4=Support+exchange&c=4&s=90&.sig=yLpvc
LTIDJ5FTkRJGsO11w> part Programming
<http://groups.yahoo.com/gads?t=ms&k=Programming+languages&w1=Computer+part&
w2=Programming+languages&w3=Microsoft+axapta&w4=Support+exchange&c=4&s=90&.s
ig=cuhEClK4dU4wapXFmKisbQ> languages Microsoft
<http://groups.yahoo.com/gads?t=ms&k=Microsoft+axapta&w1=Computer+part&w2=Pr
ogramming+languages&w3=Microsoft+axapta&w4=Support+exchange&c=4&s=90&.sig=yf
eG_U6QaLfPOZZIud02Fg> axapta
Support
<http://groups.yahoo.com/gads?t=ms&k=Support+exchange&w1=Computer+part&w2=Pr
ogramming+languages&w3=Microsoft+axapta&w4=Support+exchange&c=4&s=90&.sig=hy
8yRGMzrmxdphyITTUeqA> exchange
_____
YAHOO! GROUPS LINKS
* Visit your group "development-axapta
<http://groups.yahoo.com/group/development-axapta> " on the web.
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
_____
[Non-text portions of this message have been removed]
YAHOO! GROUPS LINKS
- Visit your group "development-axapta" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
