hi: I've inserted my answers bellow:
> > I'm using 2.3.7.0 beta 3 in my fon2n. > > I've come across a print sharing bug. > > Sometimes the printer simply does not work (well, the fonera does not > > print). > What do you mean by "sometimes"? Sometimes after booting the Fonera, it > doesn't work at all? Or do you mean that sometimes it works for a while, > then stops working for a while, works again for a while, etc. > I confirm that "sometimes" it does not print. it works for sometime and then it stops working (may pass days until getting the problem) > I've found a strange "turn around" - simply disconnect the printer usb > > cable from the fonera and connect it back. it works ! But after a reboot > it > > stops working again. > Ok, that's useful to know: It will hopefully allow us to compare the > "working" case with the "non-working" case and find out what's wrong. If > you could first try the downgrade I suggested above, depending on the > result I'll give you further debugging instructions. > correction: when it works it stays working for several reboots and several days. I've also came across fonera auto-rebooting after receiving the a print spool !!! Once is not working, it is solved by unplug and replug the usb cable. I did not noticed neither of these behaviors on beta2. I've tried to downgrade to beta 2, trough the web interface. It starts doing the upgrade but in the end it stays in beta 3 (downgrade not done). Should I go trough another approach to downgrade ? Thanks Nuno
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
