Hi Nuno, > I confirm that "sometimes" it does not print. it works for sometime > and then it stops working (may pass days until getting the problem) Ok.
> I've also came across fonera auto-rebooting after receiving the a > print spool !!! This could be because the print job is too big to keep in memory, the Fonera automatically reboots when it is out of memory for whatever reason. If this is what's causing the reboots, I suspect this is a different problem. > Once is not working, it is solved by unplug and replug the usb cable. Ok. If it's not working, did you try if rebooting the Fonera (without touching the USB cable) also works? > I've tried to downgrade to beta 2, trough the web interface. It starts > doing the upgrade but in the end it stays in beta 3 (downgrade not done). > Should I go trough another approach to downgrade ? Weird, that should normally work (before 2.3.6.1, downgrading did not work, but that should no longer be the case). I just tried a downgrade (from an SVN version to 2.3.7.0 beta2) and that worked as expected. Are you sure you used the right file? Did you get the "countdown" dialog after uploading the file? Perhaps you accidentally used the 2202 / 2.0g version, if you do that the upgrade silently fails. Gr. Matthijs
signature.asc
Description: Digital signature
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
