Interesting. I thought I had beta3 before. The cable obviously didn't work, but the driver did. Thanks!
However, other people will probably experience this problem. Any words on how can I help debug this issue on the new driver? 2013/1/3 Matthijs Kooijman - Fon <[email protected]> > Hi Alexandre, > > > - 2.0n > > - Yep, the disk worked before. It's a self-powered media player (no > powered > > hub required) > Ok. Do you remember the newest version where it used to work? > > > - I will try with another cable, although it's a thick and good cable. > Thanks. I don't expect much, but just in case. > > In beta3, the USB driver was updated. This driver update seems the most > likely cause of your problem. Could you try installing the old driver to > see if that fixes the problem? > > The old driver can be downloaded from our firmware autobuilder, just run > the following commands (all on your Fonera through SSH): > > root@Fonera:~# wget > http://download.fonosfera.org/auto-builds/fon-ng/fon-ng-r2060/fonera2n/packages/mipsel/ra_usb_2_mipsel.ipk > Connecting to download.fonosfera.org (67.192.249.56:80) > ra_usb_2_mipsel.ipk 100% > > |**************************************************************************************************************| > 46388 --:--:-- ETA > root@Fonera:~# opkg install ra_usb_2_mipsel.ipk > Installing ra_usb (2) to root... > Configuring ra_usb > > Then reboot to load the new driver. > > Regards, > > Matthijs Kooijman > > _______________________________________________ > Development mailing list > [email protected] > http://fonosfera.org/mailman/listinfo/development > -- [] Alexandre Strube [email protected]
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
