Hi Mario, > again it took some time, I have not been using the modem for a while. > now it is in an other fonera, hope I am not forgetting details here. This is exactly what I need.
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=12d1 ProdID=1f01 Rev= 1.02 > S: Manufacturer=HUAWEI > S: Product=HUAWEI HiLink > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms The above part tells me that the USB device exposes exactly one interface (I:) of the storage class. There is no network or serial interface in addition to the storage interface, meaning this device probably needs a modeswitch. The current firmware does not contain usb_modeswitch for this device, but the latest version of usb_modeswitch does. I've attached the relevant config file to this mail, if you drop this in /etc/usb_modeswitch.d/ on your Fonera and then plug in your dongle, it should be switched to the right mode. Let me know if this works! Regards, Matthijs Kooijman
# Huawei E353 (3.se) TargetVendor= 0x12d1 TargetProduct= 0x14db MessageContent="55534243123456780000000000000a11062000000000000100000000000000" NoDriverLoading=1
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
