Yes. Thanks a lot No dia 06/03/2013 12:10, "Matthijs Kooijman - Fon" < [email protected]> escreveu:
> Hi FM, > > > I've a Fonera 2.0n. > > > > Can someone point me what does these two interfaces refer to (WAN, LAN > Port > > X)? > > Subject: Re: [fonosfera] Interfaces eth0.1/3 and eth0/2 > > I'm not entirely sure which two interfaces you mean here, but on a > 2.0n with the official firmware, you have: > > eth0 This is the network device that connects to the Fonera's internal > switch, so this receives both WAN and LAN ethernet packets, with > vlan tagging. > eth0.1 This is the network device that receives the (untagged) LAN > ethernet packets. Do not use this one directly, since it is part > of the br-lan bridge. > eth0.2 This is the network device that receives the (untagged) WAN > ethernet packets. You can use this device as normal. > ra0 This is the private "MyPlace" wifi network. Do not use this one > directly, since it is part of the br-lan bridge. > ra1 This is the public "FON_FREE_INTERNET" wifi network. This one > normally managed and configured by chillispot. > apcli0 This is the wifi client network, used when in wifi or > wifi-bridge mode. > br-lan This is a bridge that connects the private wifi network and LAN > ethernet ports together as a single layer 2 network. This is > where the LAN IP address is configured and this is the interface > to use as the "LAN" interface normally. > > Does this answer your question? > > Regards, > > Matthijs Kooijman > > _______________________________________________ > Development mailing list > [email protected] > http://fonosfera.org/mailman/listinfo/development >
_______________________________________________ Development mailing list [email protected] http://fonosfera.org/mailman/listinfo/development
