The patch adds device tree probe support for gpio-mxc driver.
Signed-off-by: Shawn Guo <[email protected]>
Cc: Grant Likely <[email protected]>
---
.../devicetree/bindings/gpio/fsl-imx-gpio.txt | 22 ++++++++++++++++++++
drivers/gpio/gpio-mxc.c | 18 +++++++++++++++-
2 files changed, 39 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
new file mode 100644
index 0000000..4363ae4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt
@@ -0,0 +1,22 @@
+* Freescale i.MX/MXC GPIO controller
+
+Required properties:
+- compatible : Should be "fsl,<soc>-gpio"
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all 32 pins, if
+ one number. If two numbers, the first one is the interrupt shared
+ by low 16 pins and the second one is for high 16 pins.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify optional parameters (currently
+ unused).
+
+Example:
+
+gpio0: gpio@73f84000 {
+ compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
+ reg = <0x73f84000 0x4000>;
+ interrupts = <50 51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+};
diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 4875690..059d44a 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -27,6 +27,8 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/basic_mmio_gpio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm-generic/bug.h>
enum mxc_gpio_hwtype {
@@ -126,6 +128,13 @@ static struct platform_device_id mxc_gpio_devtype[] = {
}
};
+static const struct of_device_id mxc_gpio_dt_ids[] = {
+ { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO],
},
+ { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX2_GPIO],
},
+ { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX_GPIO],
},
+ { /* sentinel */ }
+};
+
/*
* MX2 has one interrupt *for all* gpio ports. The list is used
* to save the references to all ports, so that mx2_gpio_irq_handler
@@ -308,7 +317,13 @@ static void __init mxc_gpio_init_gc(struct mxc_gpio_port
*port)
static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
{
- enum mxc_gpio_hwtype hwtype = pdev->id_entry->driver_data;
+ const struct of_device_id *of_id =
+ of_match_device(mxc_gpio_dt_ids, &pdev->dev);
+ enum mxc_gpio_hwtype hwtype;
+
+ if (of_id)
+ pdev->id_entry = of_id->data;
+ hwtype = pdev->id_entry->driver_data;
if (mxc_gpio_hwtype) {
/*
@@ -426,6 +441,7 @@ static struct platform_driver mxc_gpio_driver = {
.driver = {
.name = "gpio-mxc",
.owner = THIS_MODULE,
+ .of_match_table = mxc_gpio_dt_ids,
},
.probe = mxc_gpio_probe,
.id_table = mxc_gpio_devtype,
--
1.7.4.1
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
