Pretty much the same as last time with the exception that I've split the IRQ portion from the GPIO bit and added a dependency on IRQ_DOMAIN rather than selecting it.
The 2nd patch is dependent on Rob's irqdomain support for the generic irq chip so can be dropped if needed. Jamie Iles (3): gpio: add a driver for the Synopsys DesignWare APB GPIO block gpio: dwapb: add support for GPIO interrupts ARM: picoxcell: use new Synopsys Designware GPIO binding .../devicetree/bindings/gpio/snps-dwapb-gpio.txt | 63 ++++ arch/arm/boot/dts/picoxcell-pc3x2.dtsi | 19 +- arch/arm/boot/dts/picoxcell-pc3x3.dtsi | 28 +- drivers/gpio/Kconfig | 9 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-dwapb.c | 351 ++++++++++++++++++++ 6 files changed, 443 insertions(+), 28 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt create mode 100644 drivers/gpio/gpio-dwapb.c -- 1.7.5.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
