Use the DesignWare specific binding rather than the generic binding which isn't supported in mainline.
Signed-off-by: Jamie Iles <[email protected]> --- arch/arm/boot/dts/picoxcell-pc3x2.dtsi | 19 ++++++++----------- arch/arm/boot/dts/picoxcell-pc3x3.dtsi | 28 +++++++++++----------------- 2 files changed, 19 insertions(+), 28 deletions(-) diff --git a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi index f0a8c20..a247812 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x2.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x2.dtsi @@ -169,28 +169,25 @@ reg = <0x20000 0x1000>; #address-cells = <1>; #size-cells = <0>; - reg-io-width = <4>; banka: gpio-controller@0 { compatible = "snps,dw-apb-gpio-bank"; gpio-controller; #gpio-cells = <2>; - gpio-generic,nr-gpio = <8>; - - regoffset-dat = <0x50>; - regoffset-set = <0x00>; - regoffset-dirout = <0x04>; + nr-gpio = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&vic1>; + interrupts = <0 1 2 3 4 5 6 7>; }; bankb: gpio-controller@1 { compatible = "snps,dw-apb-gpio-bank"; gpio-controller; #gpio-cells = <2>; - gpio-generic,nr-gpio = <8>; - - regoffset-dat = <0x54>; - regoffset-set = <0x0c>; - regoffset-dirout = <0x10>; + nr-gpio = <8>; + reg = <1>; }; }; diff --git a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi index daa962d..96f049f 100644 --- a/arch/arm/boot/dts/picoxcell-pc3x3.dtsi +++ b/arch/arm/boot/dts/picoxcell-pc3x3.dtsi @@ -252,39 +252,33 @@ reg = <0x20000 0x1000>; #address-cells = <1>; #size-cells = <0>; - reg-io-width = <4>; banka: gpio-controller@0 { compatible = "snps,dw-apb-gpio-bank"; gpio-controller; + reg = <0>; #gpio-cells = <2>; - gpio-generic,nr-gpio = <8>; - - regoffset-dat = <0x50>; - regoffset-set = <0x00>; - regoffset-dirout = <0x04>; + nr-gpio = <8>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&vic1>; + interrupts = <0 1 2 3 4 5 6 7>; }; bankb: gpio-controller@1 { compatible = "snps,dw-apb-gpio-bank"; gpio-controller; + reg = <1>; #gpio-cells = <2>; - gpio-generic,nr-gpio = <16>; - - regoffset-dat = <0x54>; - regoffset-set = <0x0c>; - regoffset-dirout = <0x10>; + nr-gpio = <16>; }; - bankd: gpio-controller@2 { + bankd: gpio-controller@3 { compatible = "snps,dw-apb-gpio-bank"; gpio-controller; + reg = <3>; #gpio-cells = <2>; - gpio-generic,nr-gpio = <30>; - - regoffset-dat = <0x5c>; - regoffset-set = <0x24>; - regoffset-dirout = <0x28>; + nr-gpio = <30>; }; }; -- 1.7.5.4 _______________________________________________ devicetree-discuss mailing list [email protected] https://lists.ozlabs.org/listinfo/devicetree-discuss
