Documentation for irq_domain library which will be created in subsequent patches.
v4: editorial changes Signed-off-by: Grant Likely <grant.lik...@secretlab.ca> Reviewed-by: Randy Dunlap <rdun...@xenotime.net> Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org> Cc: Thomas Gleixner <t...@linutronix.de> Cc: Rob Herring <rob.herr...@calxeda.com> Cc: Milton Miller <milt...@bga.com> Tested-by: Olof Johansson <o...@lixom.net> --- Documentation/IRQ-domain.txt | 117 ++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 9 +++ 2 files changed, 126 insertions(+), 0 deletions(-) create mode 100644 Documentation/IRQ-domain.txt diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt new file mode 100644 index 0000000..27dcaab --- /dev/null +++ b/Documentation/IRQ-domain.txt @@ -0,0 +1,117 @@ +irq_domain interrupt number mapping library + +The current design of the Linux kernel uses a single large number +space where each separate IRQ source is assigned a different number. +This is simple when there is only one interrupt controller, but in +systems with multiple interrupt controllers the kernel must ensure +that each one gets assigned non-overlapping allocations of Linux +IRQ numbers. + +The irq_alloc_desc*() and irq_free_desc*() APIs provide allocation of +irq numbers, but they don't provide any support for reverse mapping of +the controller-local IRQ (hwirq) number into the Linux IRQ number +space. + +The irq_domain library adds mapping between hwirq and IRQ numbers on +top of the irq_alloc_desc*() API. An irq_domain to manage mapping is +preferred over interrupt controller drivers open coding their own +reverse mapping scheme. + +irq_domain also implements translation from Device Tree interrupt +specifiers to hwirq numbers, and can be easily extended to support +other IRQ topology data sources. + +=== irq_domain usage === +An interrupt controller driver creates and registers an irq_domain by +calling one of the irq_domain_add_*() functions (each mapping method +has a different allocator function, more on that later). The function +will return a pointer to the irq_domain on success. The caller must +provide the allocator function with an irq_domain_ops structure with +the .map callback populated as a minimum. + +In most cases, the irq_domain will begin empty without any mappings +between hwirq and IRQ numbers. Mappings are added to the irq_domain +by calling irq_create_mapping() which accepts the irq_domain and a +hwirq number as arguments. If a mapping for the hwirq doesn't already +exist then it will allocate a new Linux irq_desc, associate it with +the hwirq, and call the .map() callback so the driver can perform any +required hardware setup. + +When an interrupt is received, irq_find_mapping() function should +be used to find the Linux IRQ number from the hwirq number. + +If the driver has the Linux IRQ number or the irq_data pointer, and +needs to know the associated hwirq number (such as in the irq_chip +callbacks) then it can be directly obtained from irq_data->hwirq. + +=== Types of irq_domain mappings === +There are several mechanisms available for reverse mapping from hwirq +to Linux irq, and each mechanism uses a different allocation function. +Which reverse map type should be used depends on the use case. Each +of the reverse map types are described below: + +==== Linear ==== +irq_domain_add_linear() + +The linear reverse map maintains a fixed size table indexed by the +hwirq number. When a hwirq is mapped, an irq_desc is allocated for +the hwirq, and the IRQ number is stored in the table. + +The Linear map is a good choice when the maximum number of hwirqs is +fixed and a relatively small number (~ < 256). The advantages of this +map are fixed time lookup for IRQ numbers, and irq_descs are only +allocated for in-use IRQs. The disadvantage is that the table must be +as large as the largest possible hwirq number. + +The majority of drivers should use the linear map. + +==== Tree ==== +irq_domain_add_tree() + +The irq_domain maintains a radix tree map from hwirq numbers to Linux +IRQs. When an hwirq is mapped, an irq_desc is allocated and the +hwirq is used as the lookup key for the radix tree. + +The tree map is a good choice if the hwirq number can be very large +since it doesn't need to allocate a table as large as the largest +hwirq number. The disadvantage is that hwirq to IRQ number lookup is +dependent on how many entries are in the table. + +Very few drivers should need this mapping. At the moment, powerpc +iseries is the only user. + +==== No Map ===- +irq_domain_add_nomap() + +The No Map mapping is to be used when the hwirq number is +programmable in the hardware. In this case it is best to program the +Linux IRQ number into the hardware itself so that no mapping is +required. Calling irq_create_direct_mapping() will allocate a Linux +IRQ number and call the .map() callback so that driver can program the +Linux IRQ number into the hardware. + +Most drivers cannot use this mapping. + +==== Legacy ==== +irq_domain_add_legacy() +irq_domain_add_legacy_isa() + +The Legacy mapping is a special case for drivers that already have a +range of irq_descs allocated for the hwirqs. It is used when the +driver cannot be immediately converted to use the linear mapping. For +example, many embedded system board support files use a set of #defines +for IRQ numbers that are passed to struct device registrations. In that +case the Linux IRQ numbers cannot be dynamically assigned and the legacy +mapping should be used. + +The legacy map assumes a contiguous range of IRQ numbers has already +been allocated for the controller and that the IRQ number can be +calculated by adding a fixed offset to the hwirq number, and +visa-versa. The disadvantage is that it requires the interrupt +controller to manage IRQ allocations and it requires an irq_desc to be +allocated for every hwirq, even if it is unused. + +The legacy map should only be used if fixed IRQ mappings must be +supported. For example, ISA controllers would use the legacy map for +mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ +numbers. diff --git a/MAINTAINERS b/MAINTAINERS index 9a648eb..57dd0f5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3640,6 +3640,15 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core F: kernel/irq/ +IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY) +M: Benjamin Herrenschmidt <b...@kernel.crashing.org> +M: Grant Likely <grant.lik...@secretlab.ca> +T: git git://git.secretlab.ca/git/linux-2.6.git irqdomain/next +S: Maintained +F: Documentation/IRQ-domain.txt +F: include/linux/irqdomain.h +F: kernel/irq/irqdomain.c + ISAPNP M: Jaroslav Kysela <pe...@perex.cz> S: Maintained -- 1.7.9 _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss