Add support for DT based probing of twl6040 core.

Example of dts section for twl6040:
twl6040: twl6040@4b {
        compatible = "ti,twl6040";
        reg = <0x4b>;
        interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
        interrupt-parent = <&gic>;
        twl6040,audpwron_gpio = <&gpio4 31 0>;  /* gpio line 127 */
        enable-active-high;

        interrupt-controller;
        #interrupt-cells = <1>;

        vio-supply = <&v1v8>;
        v2v1-supply = <&v2v1>;

        twl6040_codec: twl6040@0 {
                compatible = "ti,twl6040-codec";
                interrupts = <1>;
        };
};

Signed-off-by: Peter Ujfalusi <peter.ujfal...@ti.com>
---
 Documentation/devicetree/bindings/mfd/twl6040.txt |   51 +++++++++++++++++++++
 drivers/mfd/twl6040-core.c                        |   23 +++++++---
 drivers/mfd/twl6040-irq.c                         |    6 +++
 3 files changed, 74 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/twl6040.txt

diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt 
b/Documentation/devicetree/bindings/mfd/twl6040.txt
new file mode 100644
index 0000000..6d2399c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
@@ -0,0 +1,51 @@
+Texas Instruments TWL6040 family
+
+The TWL6040s are 8-channel high quality low-power audio codecs providing audio
+and vibra functionality on OMAP4+ platforms.
+They are connected ot the host processor via i2c for commands, McPDM for audio
+data and commands.
+
+Required properties:
+- compatible : Must be "ti,twl6040";
+- reg: must be 0x4b for i2c address
+- interrupts: twl6040 has one interrupt line connecteded to the main SoC
+- interrupt-parent: The parent interrupt controller
+- interrupt-controller: twl6040 support several interrupts internally, it is
+  considered as an interupt controller cascaded to the SoC core.
+#interrupt-cells = <1>;
+- twl6040,audpwron_gpio: Power on GPIO line for the twl6040
+
+- vio-supply: Regulator for the twl6040 VIO supply
+- v2v1-supply: Regulator for the twl6040 V2V1 supply
+
+Optional properties, nodes:
+- enable-active-high: To power on the twl6040 during boot.
+- Child nodes for audio functionality and for the vibra driver
+  For details on the child nodes see:
+  Documentation/devicetree/bindings/input/twl6040-vibra.txt - Vibra driver
+  Documentation/devicetree/bindings/sound/twl6040.txt - ASoC codec driver
+
+Example:
+/*
+ * 8-channel high quality low-power audio codec
+ * http://www.ti.com/lit/ds/symlink/twl6040.pdf
+ */
+twl6040: twl6040@4b {
+       compatible = "ti,twl6040";
+       reg = <0x4b>;
+       interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+       interrupt-parent = <&gic>;
+       twl6040,audpwron_gpio = <&gpio4 31 0>;  /* gpio line 127 */
+       enable-active-high;
+
+       interrupt-controller;
+       #interrupt-cells = <1>;
+
+       vio-supply = <&v1v8>;
+       v2v1-supply = <&v2v1>;
+
+       twl6040_codec: twl6040@0 {
+               compatible = "ti,twl6040-codec";
+               interrupts = <1>;
+       };
+};
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index c50fba7..23b9771 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -29,6 +29,10 @@
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
@@ -505,11 +509,12 @@ static int __devinit twl6040_probe(struct i2c_client 
*client,
                                     const struct i2c_device_id *id)
 {
        struct twl6040_platform_data *pdata = client->dev.platform_data;
+       struct device_node *node = client->dev.of_node;
        struct twl6040 *twl6040;
        struct mfd_cell *cell = NULL;
        int ret, children = 0;
 
-       if (!pdata) {
+       if (!pdata && !node) {
                dev_err(&client->dev, "Platform data is missing\n");
                return -EINVAL;
        }
@@ -560,9 +565,13 @@ static int __devinit twl6040_probe(struct i2c_client 
*client,
        twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
 
        /* ERRATA: Automatic power-up is not possible in ES1.0 */
-       if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
-               twl6040->audpwron = pdata->audpwron_gpio;
-       else
+       if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) {
+               if (pdata)
+                       twl6040->audpwron = pdata->audpwron_gpio;
+               else
+                       twl6040->audpwron = of_get_named_gpio(node,
+                                               "twl6040,audpwron_gpio", 0);
+       } else
                twl6040->audpwron = -EINVAL;
 
        if (gpio_is_valid(twl6040->audpwron)) {
@@ -589,7 +598,7 @@ static int __devinit twl6040_probe(struct i2c_client 
*client,
        /* dual-access registers controlled by I2C only */
        twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
 
-       if (pdata->codec) {
+       if (pdata && pdata->codec) {
                int irq = twl6040->irq_base + TWL6040_IRQ_PLUG;
 
                cell = &twl6040->cells[children];
@@ -603,7 +612,7 @@ static int __devinit twl6040_probe(struct i2c_client 
*client,
                children++;
        }
 
-       if (pdata->vibra) {
+       if (pdata && pdata->vibra) {
                int irq = twl6040->irq_base + TWL6040_IRQ_VIB;
 
                cell = &twl6040->cells[children];
@@ -623,6 +632,8 @@ static int __devinit twl6040_probe(struct i2c_client 
*client,
                                      children, NULL, 0);
                if (ret)
                        goto mfd_err;
+       } else if (node) {
+               ret = of_platform_populate(node, NULL, NULL, &client->dev);
        } else {
                dev_err(&client->dev, "No platform data found for children\n");
                ret = -ENODEV;
diff --git a/drivers/mfd/twl6040-irq.c b/drivers/mfd/twl6040-irq.c
index 914978e..4b42543 100644
--- a/drivers/mfd/twl6040-irq.c
+++ b/drivers/mfd/twl6040-irq.c
@@ -25,6 +25,8 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/twl6040.h>
@@ -139,6 +141,7 @@ static irqreturn_t twl6040_irq_thread(int irq, void *data)
 
 int twl6040_irq_init(struct twl6040 *twl6040)
 {
+       struct device_node *node = twl6040->dev->of_node;
        int i, nr_irqs, irq_base, ret;
        u8 val;
 
@@ -158,6 +161,9 @@ int twl6040_irq_init(struct twl6040 *twl6040)
        }
        twl6040->irq_base = irq_base;
 
+       irq_domain_add_legacy(node, ARRAY_SIZE(twl6040_irqs), irq_base, 0,
+                             &irq_domain_simple_ops, NULL);
+
        /* Register them with genirq */
        for (i = irq_base; i < irq_base + nr_irqs; i++) {
                irq_set_chip_data(i, twl6040);
-- 
1.7.8.6

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Reply via email to