With recent changes in omap gpmc driver code, in case of DT boot mode, where bootloader does not configure gpmc cs space will result into kernel BUG() inside gpmc_mem_init() function, as gpmc cs0 gpmc_config7[0].csvalid bit is set to '1' and gpmc_config7[0].baseaddress is set to '0' on reset.
This use-case is applicable for any board/EVM which doesn't have any peripheral connected to gpmc cs0, for example BeagleXM and BeagleBone, so DT boot mode fails. This patch adds of_have_populated_dt() check before creating device, so that for DT boot mode, gpmc probe will not be called which is expected behavior, as gpmc is not supported yet from DT. Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com> Cc: Afzal Mohammed <af...@ti.com> Cc: Tony Lindgren <t...@atomide.com> Cc Paul Walmsley <p...@pwsan.com> --- This should go in for rc1, as this breaks AM33xx boot. arch/arm/mach-omap2/gpmc.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8ab1e1b..c68f9e1 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -981,6 +981,10 @@ static int __init omap_gpmc_init(void) struct platform_device *pdev; char *oh_name = "gpmc"; + /* If dtb is there, the devices will be created dynamically */ + if (of_have_populated_dt()) + return -ENODEV; + oh = omap_hwmod_lookup(oh_name); if (!oh) { pr_err("Could not look up %s\n", oh_name); -- 1.7.0.4 _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss