Hi Hebbar, On Fri, May 31, 2013 at 03:43:00PM +0530, Hebbar Gururaja wrote: > By optionally putting the pins into sleep state in the suspend [or in > runtime_suspend] callback we can accomplish two things. > - One is to minimize current leakage from pins and thus save power, > - second, we can prevent the IP from driving pins output in an > uncontrolled manner, which may happen if the power domain drops the > domain regulator. > > These states can be specified in the DT blob and corresponding driver > can pick these states during probe & set the related values during > idle/suspend. > > Not all drivers support/has idle state. Drivers like i2c, spi, mmc has > idle states and hence these drivers are updated to support all the > three states > - default : during regular operation > - idle : when the module is in idle state > - sleep : when the module is in suspend state > > For those drivers which doesn't support/have idle state (at least at > the moment), only default & sleep state is added.
As with the original introduction of pinctrl states my question is: "Can all of this be handled in the driver/bus core instead of adding a lot of boilerplate code to the individual drivers". Thanks. -- Dmitry _______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss