On Thursday 21 November 2013 10:57 PM, Dan Murphy wrote:
On 11/21/2013 10:58 AM, Tony Lindgren wrote:
* Balaji T K <balaj...@ti.com> [131121 05:51]:
pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core
and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core.
Fix the following error message:
pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38)
pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins
56x
Why is the led pins moved then?
Hi Dan,
I just moved 27 lines (wl12xx_pins, wl12xx_gpio) up, git diff generated smaller
diff stat by moving 10 line of code (led_wkgpio_pins) further down :-)
SDIO card is not detected after moving pin mux to omap4_pmx_core since
sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card.
Cool, does this fix the issue with the WLAN not coming up after a warm reset
on panda?
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
