* Tony Lindgren <t...@atomide.com> [131127 08:49]: > * Balaji T K <balaj...@ti.com> [131127 08:30]: > > On Wednesday 27 November 2013 03:25 AM, Tony Lindgren wrote: > > >* Dan Murphy <dmur...@ti.com> [131121 09:28]: > > >>On 11/21/2013 10:58 AM, Tony Lindgren wrote: > > >>>* Balaji T K <balaj...@ti.com> [131121 05:51]: > > >>>>pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core > > >>>>and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. > > >>>> > > >>>>Fix the following error message: > > >>>>pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) > > >>>>pinctrl-single 4a31e040.pinmux: could not add functions for > > >>>>pinmux_wl12xx_pins 56x > > >> > > >>Why is the led pins moved then? > > > > > >Heh the patch just looks that way, looking at the curly brackets > > >thing do get moved properly. > > > > > >>>>SDIO card is not detected after moving pin mux to omap4_pmx_core since > > >>>>sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect > > >>>>SDIO card. > > >>>Cool, does this fix the issue with the WLAN not coming up after a warm > > >>>reset > > >>>on panda? > > > > > >Also commit f446043f1aa7 (regulator: fixed: fix regulator_list_voltage() > > >for > > >regression) is needed that recently got merged. But with v3.13-rc1 + > > >f446043f1aa7 + this patch no luck whatsoever bringing up the wl12xx so > > >there > > >must be also some regression somewhere from v3.12 on that? > > > > > Hi Tony, > > > > I tried loading wl12xx as modules on latest base as yours with > > ti-connectivity/wl127x-fw-5-sr.bin firmware in place and I could connect > > and run iperf. > > Oh OK I must have missed something then. > > Does it now work after a warm reboot too? And after bringing the interface > down with "ifconfig wlan0 down" followed by "ifconfig wlan0 up"?
Yes great, I can confirm that v3.13-rc1 + f446043f1aa7 (regulator: fixed: fix regulator_list_voltage() for regression) + this patch works even after a warm reset :) Will apply both to omap-for-v3.13/fixes-take4 with Cc stable. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
