Hi Ivan,
This patch fail to apply on linux-next Tree. Probably because this is
based on Stanimir's older patch series "Support for Qualcomm QPNP
PMIC's". He has posted v4 of them on which it fails to apply. Am I correct?
Thanks
Pramod
On Monday 11 August 2014 09:10 PM, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <iiva...@mm-sol.com>
>
> Add nodes for PM8941 and PM8841 GPIO and MPP PMIC subfunctions.
>
> Signed-off-by: Ivan T. Ivanov <iiva...@mm-sol.com>
> ---
> arch/arm/boot/dts/qcom-msm8974.dtsi | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi
> b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index c7ae7ba..3967797 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -267,6 +267,31 @@
> reg-names = "rtc", "alarm";
> interrupts = <0x0 0x61 0x1
> IRQ_TYPE_EDGE_RISING>;
> };
> +
> + pm8941_gpios: gpios@c000 {
> + compatible = "qcom,pm8941-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <0 0xc0 0 0>, <0 0xc1 0
> 0>, <0 0xc2 0 0>, <0 0xc3 0 0>,
> + <0 0xc4 0 0>, <0 0xc5 0
> 0>, <0 0xc6 0 0>, <0 0xc7 0 0>,
> + <0 0xc8 0 0>, <0 0xc9 0
> 0>, <0 0xca 0 0>, <0 0xcb 0 0>,
> + <0 0xcc 0 0>, <0 0xcd 0
> 0>, <0 0xce 0 0>, <0 0xcf 0 0>,
> + <0 0xd0 0 0>, <0 0xd1 0
> 0>, <0 0xd2 0 0>, <0 0xd3 0 0>,
> + <0 0xd4 0 0>, <0 0xd5 0
> 0>, <0 0xd6 0 0>, <0 0xd7 0 0>,
> + <0 0xd8 0 0>, <0 0xd9 0
> 0>, <0 0xda 0 0>, <0 0xdb 0 0>,
> + <0 0xdc 0 0>, <0 0xdd 0
> 0>, <0 0xde 0 0>, <0 0xdf 0 0>,
> + <0 0xe0 0 0>, <0 0xe1 0
> 0>, <0 0xe2 0 0>, <0 0xe3 0 0>;
> + };
> +
> + pm8941_mpps: mpps@a000 {
> + compatible = "qcom,pm8941-mpp";
> + reg = <0xa000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <0 0xa0 0 0>, <0 0xa1 0
> 0>, <0 0xa2 0 0>, <0 0xa3 0 0>,
> + <0 0xa4 0 0>, <0 0xa5 0
> 0>, <0 0xa6 0 0>, <0 0xa7 0 0>;
> + };
> };
>
> usid1: pm8941@1 {
> @@ -281,6 +306,14 @@
> reg = <0x4 SPMI_USID>;
> #address-cells = <1>;
> #size-cells = <0>;
> +
> + pm8841_mpps: mpps@a000 {
> + compatible = "qcom,pm8841-mpp";
> + reg = <0xa000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupts = <4 0xa0 0 0>, <4 0xa1 0
> 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
> + };
> };
>
> usid5: pm8841@5 {
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
