Hi,
On Tuesday 18 November 2014 05:38 PM, Yadwinder Singh Brar wrote:
With default config on smdk5250 latest tree throws below message :
[ 2.226049] thermal thermal_zone0: critical temperature reached(224
C),shutting down
[ 2.227840] reboot: Failed to start orderly shutdown: forcing the issue
and hangs randomly because it reads wrong temperature value.
I can't figure out any direct relation between LDO10 and TMU from board
schematics which I have. So making LDO10 always-on to fix issue for now.
Signed-off-by: Yadwinder Singh Brar <[email protected]>
Tested this on SMDK5250 board, system boot is fine now, hence
Tested-by: Pankaj Dubey <[email protected]>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index bc27cc2..95b5b51 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -190,6 +190,7 @@
regulator-name = "P1.8V_LDO_OUT10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo11_reg: LDO11 {
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
