Initial version of device tree for Xilinx ZynqMP SoC.
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
Acked-by: Sören Brinkmann <soren.brinkm...@xilinx.com>
---
Changes in v2:
- move timer out of amba_apu bus because it is not on bus
Reported by Mark
- FIC GICC and GICV addresses - Reported by Rob
- Fix copyright
- Enable cadence IP in defconfig
- Add support for macb multiqueue
arch/arm64/Kconfig | 5 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/xilinx/Makefile | 5 +
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 47 +++++
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 303 ++++++++++++++++++++++++++++
arch/arm64/configs/defconfig | 3 +
6 files changed, 364 insertions(+)
create mode 100644 arch/arm64/boot/dts/xilinx/Makefile
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp.dtsi
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1b8e97331ffb..9f805cf2e0b0 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -228,6 +228,11 @@ config ARCH_XGENE
help
This enables support for AppliedMicro X-Gene SOC Family
+config ARCH_ZYNQMP
+ bool "Xilinx ZynqMP Family"
+ help
+ This enables support for Xilinx ZynqMP Family
+
endmenu
menu "Bus support"
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index e0350caf049e..ff088ec6ca5f 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -5,5 +5,6 @@ dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
dts-dirs += mediatek
+dts-dirs += xilinx
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/xilinx/Makefile
b/arch/arm64/boot/dts/xilinx/Makefile
new file mode 100644
index 000000000000..ae16427f6a4a
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
new file mode 100644
index 000000000000..0a3f40ecd06d
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -0,0 +1,47 @@
+/*
+ * dts file for Xilinx ZynqMP ep108 development board
+ *
+ * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.si...@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "zynqmp.dtsi"
+
+/ {
+ model = "ZynqMP EP108";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x40000000>;
+ };
+};
+
+&gem0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ phy0: phy@0{
+ reg = <0>;
+ max-speed = <100>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
new file mode 100644
index 000000000000..c5f140a34856
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -0,0 +1,303 @@
+/*
+ * dts file for Xilinx ZynqMP
+ *
+ * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.si...@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ compatible = "xlnx,zynqmp";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 143 4>,
+ <0 144 4>,
+ <0 145 4>,
+ <0 146 4>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ };
+
+ amba_apu {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ gic: interrupt-controller@f9010000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ reg = <0x0 0xf9010000 0x10000>,
+ <0x0 0xf902f000 0x2000>,
+ <0x0 0xf9040000 0x20000>,
+ <0x0 0xf906f000 0x2000>;
+ interrupt-controller;
+ };
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+
+ misc_clk: misc_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ ttc0: timer@ff110000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
+ reg = <0x0 0xff110000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc1: timer@ff120000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
+ reg = <0x0 0xff120000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc2: timer@ff130000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
+ reg = <0x0 0xff130000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ ttc3: timer@ff140000 {
+ compatible = "cdns,ttc";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
+ reg = <0x0 0xff140000 0x1000>;
+ clocks = <&misc_clk>;
+ timer-width = <32>;
+ };
+
+ uart0: serial@ff000000 {
+ compatible = "cdns,uart-r1p8";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 21 4>;
+ reg = <0x0 0xff000000 0x1000>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ };
+
+ uart1: serial@ff010000 {
+ compatible = "cdns,uart-r1p8";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 22 4>;
+ reg = <0x0 0xff010000 0x1000>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ };
+
+ gpio: gpio@ff0a0000 {
+ compatible = "xlnx,zynq-gpio-1.0";
+ status = "disabled";
+ #gpio-cells = <0x2>;
+ clocks = <&misc_clk>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 16 4>;
+ reg = <0x0 0xff0a0000 0x1000>;
+ };
+
+ gem0: ethernet@ff0b0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 57 4>, <0 57 4>;
+ reg = <0x0 0xff0b0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gem1: ethernet@ff0c0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 59 4>, <0 59 4>;
+ reg = <0x0 0xff0c0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gem2: ethernet@ff0d0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 61 4>, <0 61 4>;
+ reg = <0x0 0xff0d0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gem3: ethernet@ff0e0000 {
+ compatible = "cdns,gem";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 63 4>, <0 63 4>;
+ reg = <0x0 0xff0e0000 0x1000>;
+ clock-names = "pclk", "hclk", "tx_clk";
+ clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi0: spi@ff040000 {
+ compatible = "cdns,spi-r1p6";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 19 4>;
+ reg = <0x0 0xff040000 0x1000>;
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@ff050000 {
+ compatible = "cdns,spi-r1p6";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 20 4>;
+ reg = <0x0 0xff050000 0x1000>;
+ clock-names = "ref_clk", "pclk";
+ clocks = <&misc_clk &misc_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c_clk: i2c_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0x0>;
+ clock-frequency = <111111111>;
+ };
+
+ i2c0: i2c@ff020000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 17 4>;
+ reg = <0x0 0xff020000 0x1000>;
+ clocks = <&i2c_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@ff030000 {
+ compatible = "cdns,i2c-r1p10";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 18 4>;
+ reg = <0x0 0xff030000 0x1000>;
+ clocks = <&i2c_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ sdhci0: sdhci@ff160000 {
+ compatible = "arasan,sdhci-8.9a";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 48 4>;
+ reg = <0x0 0xff160000 0x1000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&misc_clk>, <&misc_clk>;
+ };
+
+ sdhci1: sdhci@ff170000 {
+ compatible = "arasan,sdhci-8.9a";
+ status = "disabled";
+ interrupt-parent = <&gic>;
+ interrupts = <0 49 4>;
+ reg = <0x0 0xff170000 0x1000>;
+ clock-names = "clk_xin", "clk_ahb";
+ clocks = <&misc_clk>, <&misc_clk>;
+ };
+
+ watchdog0: watchdog@fd4d0000 {
+ compatible = "cdns,wdt-r1p2";
+ status = "disabled";
+ clocks= <&misc_clk>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 52 1>;
+ reg = <0x0 0xfd4d0000 0x1000>;
+ timeout-sec = <10>;
+ };
+ };
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index be1f12a5a5f0..c34bfa002303 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -36,6 +36,7 @@ CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZYNQMP=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_XGENE=y
@@ -94,6 +95,8 @@ CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
