On Mon, Oct 05, 2015 at 03:58:19PM +0900, Chanwoo Choi wrote:
> This patch adds the support for Device tree bindings of extcon-gpio driver.
> The extcon-gpio device tree node must include the both 'extcon-id' and
> 'extcon-gpio' property.
>
> For exmaple:
> usb_cable: extcon-gpio-0 {
> compatible = "extcon-gpio";
> extcon-id = <EXTCON_USB>;
> extcon-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> }
>
> ta_cable: extcon-gpio-1 {
> compatible = "extcon-gpio";
> extcon-id = <EXTCON_CHG_USB_DCP>;
> extcon-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
> debounce-ms = <50>; /* 50 millisecond */
> wakeup-source;
> }
>
> &dwc3_usb {
> extcon = <&usb_cable>;
> };
>
> &charger {
> extcon = <&ta_cable>;
> };
>
> Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
> ---
> Changes from v1:
> - Create the include/dt-bindings/extcon/extcon.h including the identification
> of external connector. These definitions are used in dts file.
> - Fix error if CONFIG_OF is disabled.
>
> .../devicetree/bindings/extcon/extcon-gpio.txt | 38 +++++++
> drivers/extcon/extcon-gpio.c | 110
> ++++++++++++++++-----
> include/dt-bindings/extcon/extcon.h | 44 +++++++++
> include/linux/extcon/extcon-gpio.h | 6 +-
> 4 files changed, 173 insertions(+), 25 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/extcon/extcon-gpio.txt
> create mode 100644 include/dt-bindings/extcon/extcon.h
>
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
> b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
> new file mode 100644
> index 000000000000..70c36f729963
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/extcon/extcon-gpio.txt
> @@ -0,0 +1,38 @@
> +GPIO Extcon device
> +
> +This is a virtual device used to generate specific external connector
> +from the GPIO pin connected to a GPIO pin.
> +
> +Required properties:
> +- compatible: Must be "extcon-gpio".
> +- extcon-id: unique id for specific external connector.
> + See include/dt-bindings/extcon/extcon.h.
This property is either misnamed and badly described, or it is
pointless (the node is sufficient to form a unique ID which can be
referenced by phandle).
What is this used for exactly?
> +- extcon-gpio: GPIO pin to detect the external connector. See gpio binding.
> +
> +Optional properties:
> +- debounce-ms: the debounce dealy for GPIO pin in millisecond.
> +- wakeup-source: Boolean, extcon can wake-up the system.
> +
> +Example: Examples of extcon-gpio node as listed below:
> +
> + usb_cable: extcon-gpio-0 {
> + compatible = "extcon-gpio";
> + extcon-id = <EXTCON_USB>;
> + extcon-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> + }
> +
> + ta_cable: extcon-gpio-1 {
> + compatible = "extcon-gpio";
> + extcon-id = <EXTCON_CHG_USB_DCP>;
> + extcon-gpio = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + debounce-ms = <50>; /* 50 millisecond */
> + wakeup-source;
> + }
> +
> + &dwc3_usb {
> + extcon = <&usb_cable>;
> + };
> +
> + &charger {
> + extcon = <&ta_cable>;
> + };
> diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
> index 279ff8f6637d..7f3e24aae0c4 100644
> --- a/drivers/extcon/extcon-gpio.c
> +++ b/drivers/extcon/extcon-gpio.c
> @@ -1,8 +1,8 @@
> /*
> * extcon_gpio.c - Single-state GPIO extcon driver based on extcon class
> *
> - * Copyright (C) 2008 Google, Inc.
> - * Author: Mike Lockwood <lockw...@android.com>
> + * Copyright (C) 2015 Chanwoo Choi <cw00.c...@samsung.com>, Samsung
> Electronics
> + * Copyright (C) 2008 Mike Lockwood <lockw...@android.com>, Google, Inc.
> *
> * Modified by MyungJoo Ham <myungjoo....@samsung.com> to support extcon
> * (originally switch class is supported)
> @@ -26,12 +26,14 @@
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/slab.h>
> #include <linux/workqueue.h>
>
> struct gpio_extcon_data {
> struct extcon_dev *edev;
> int irq;
> + bool irq_wakeup;
> struct delayed_work work;
> unsigned long debounce_jiffies;
>
> @@ -61,19 +63,50 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static int gpio_extcon_init(struct device *dev, struct gpio_extcon_data
> *data)
> +static int gpio_extcon_parse_of(struct device *dev,
> + struct gpio_extcon_data *data)
> {
> - struct gpio_extcon_pdata *pdata = data->pdata;
> + struct gpio_extcon_pdata *pdata;
> int ret;
>
> - ret = devm_gpio_request_one(dev, pdata->gpio, GPIOF_DIR_IN,
> - dev_name(dev));
> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return -ENOMEM;
> +
> + ret = device_property_read_u32(dev, "extcon-id", &pdata->extcon_id);
> + if (ret < 0)
> + return -EINVAL;
No sanity checking of the value?
Why device_property rather than of_property?
> +
> + data->id_gpiod = devm_gpiod_get(dev, "extcon", GPIOD_IN);
> if (ret < 0)
> return ret;
>
> - data->id_gpiod = gpio_to_desc(pdata->gpio);
> - if (!data->id_gpiod)
> - return -EINVAL;
> + data->irq_wakeup = device_property_read_bool(dev, "wakeup-source");
> +
> + device_property_read_u32(dev, "debounce-ms", &pdata->debounce);
Likewise, surely there's an upper bound above?
Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
