*** From dhcp-client -- To unsubscribe, see the end of this message. ***
Ted Lemon wrote:
>
> *** From dhcp-client -- To unsubscribe, see the end of this message. ***
>
> Can you grab a copy of patchlevel 19 and see if the client works any
> better? I've incorporated some fixes that John Nemeth say are needed
> to make it work with some cable modem DHCP servers.
>
> _MelloN_
>
I'm running isc-dhcp-2.b1.18.
I don't really remember what I did, but after hours of pain, cable
started to work :-)
I think I specified the gateway, I'll check.
And I'll try the patchlevel 19.
The only problem:
cam$ ifconfig -a
ed0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 216.113.2.59 netmask 0xffffff00 broadcast 216.113.2.255
ether 00:e0:29:13:56:8c
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
tun0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
cam$ ping 216.113.2.59
PING 216.113.2.59 (216.113.2.59): 56 data bytes
^C
--- 216.113.2.59 ping statistics ---
6 packets transmitted, 0 packets received, 100% packet loss
cam$
???
Thank You
--
[Malartre][[EMAIL PROTECTED]]
------------------------------------------------------------------------------
To unsubscribe from this list, please visit http://www.fugue.com/dhcp/lists
If you are without web access, or if you are having trouble with the web page,
please send mail to [EMAIL PROTECTED] Please try to use the web
page first - it will take a long time for your request to be processed by hand.
------------------------------------------------------------------------------
