Re HamPAL You can try the link below - if it still works you can download the current beta from there - bear in mind that the Cat control feature is still in beta but will work with the 3 radios mentioned You will also need the program Irfanview and all Plugins on your computer as well
If you cant get it from that site let me know and I shall email it to you de les vk2dsg The CAT PTT control is ready for a bit of testing. It has only been tested with the FT-847, FT-920 and FT-1000 D. Most of the others should work. I am not sure about the KENWOOD rigs. At least KENWOOD has made all the CAT commands standard for all rigs, but it has a different format, so I would be delighted if anyone can tell me if it works. The CommPort settings are up to the user, as he can change things and I have no idea what his settings might be. However the present ComPort settings will usually work although some may require one stop bit. These settings are remembered. To operate. 1. Select CAT PTT Settings. 2. Select the rig. If yours is not there then send me the commands and I will include it. 3. Select the comport settings that your rig or modem require. 4. Select "Use CAT PTT" Get it from: http://s34.yousendit.com/d.aspx?id=232H2H52WY2E90HJXLIGUKUHSF obrienaj wrote: > Anyone here worked with Hampal? I was advised it is software that > receives digital SSTV signals and that folks are using it on HF. I'm > off to try and foind the software. > > Andy K3UK > > > > > > > > > > > > Need a Digital mode QSO? Connect to 66.24.213.216 Other areas of interest: The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/ DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/digitalradio/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
