Hi Joe, and thanks much for the reply. I think where I am losing myself is trying to use two TNCs and the RigBlaster PRO (SSB and soundcard modes), with each having an AFSK output as well as FSK. I know where they need to go, but I am not sure how to get there! <ha> I guess the simplest way would be by switch - 3 in 1 out that switches among the three possible inputs (AFSK) to the modulator on the ACC1 plug on the back of the rig. Would need to do the same for FSK outputs to the FSK input on the rig as well I guess. The whole problem lies in the switching and isolation required to prevent any interaction between the three. Thanks much, Hank KI4MF
_____ From: digitalradio@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Joe Ivey Sent: Monday, August 14, 2006 10:37 PM To: digitalradio@yahoogroups.com Subject: Re: [digitalradio] Connections Nightmare Harold, I know nothing about the PROIII but it should have a RTTY port on the back. That is where you get the transmit and receive to the TNC. Then all you will need to hook up the CW transmit to the key jack on the PROII. Joe W4JSI ----- Original Message ----- From: Harold Aaron To: digitalradio@ <mailto:digitalradio%40yahoogroups.com> yahoogroups.com Sent: Monday, August 14, 2006 10:04 PM Subject: [digitalradio] Connections Nightmare Hello all. I presently have a RigBlaster PRO that is doing rig control and soundcard modes on COM1. Works fine, no problem. Audio from rig is taken from mic connector on PRO III. Likewise, transmit audio and PTT is through the mic connector. I now need to add a KAM + TNC for MARS work. So far I hooked the TNC to an unused com port and I can see it and send commands from within MixW. My question is, where and how is the best place to get rig audio, send transmit audio and PTT control from the TNC? Also, would like to hook-up FSK and CW as well. At present, the accessory connector on the back of the rig is free. Would that be the best option for the TNC? Appreciate any thoughts. Best, Harold KI4MF/NNN0BBX [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] Need a Digital mode QSO? Connect to Telnet://cluster.dynalias.org Other areas of interest: The MixW Reflector : http://groups.yahoo.com/group/themixwgroup/ DigiPol: http://groups.yahoo.com/group/Digipol (band plan policy discussion) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/digitalradio/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/