Charles P. Maulick wrote: > > > I just started using 3.12.4 and had similar problems (as opposed to > the earlier version). I ended up going to CONFIGURE/RIG > CONTROL/HARWARE PTT and checking USE SERIAL PORT PTT and checked Use > RTS and Use DTR. It was only by trial and error on my FT-897 with a > USB to serial adapter. Good luck. > > On Aug 19, 2009, *Curt Givens* <kc8...@clearwire.net> wrote: > > > > I have run into a curious situation with this new machine. It is > Compaq > laptop AMD X2 processor, Vista Home Premium SP2. I am using a > Rigblaster > plus and a creative live USB sound card the sound card and a usb to > serial adapter are on a usb hub. Transceiver is an FT897D. > > So far MiXW 2.19 works with this set up using RTS for push to talk, > however such is not the case with Fldigi 3.12.4 I have the com port > selected and in the hardware control tab I check RTS and > initialize then > try to send into the dummy load but the transmitter does key. If I > select RTS +12 when I initialize the computer keys the Rigblaster and > the transmitter and it stays keyed. Right now I only have the one > serial > to usb so I'm not trying to run cat. > > Anyone have a direction to try I'd really like to get fldigi > working on > this machine. > > 73,de Curt > > -- > > > > > Charles, thank you, just tried the samething and it works. So now if the storms stay or move away I might just try some radio work tonight.
tnx again 73, de Curt -- Curt Givens KC8STE, AAR5VR Army MARS Earthdog and Special Programs Director GCDOC/GCAC Dayton, OH "Registering lawful Americans who possess a gun to stop armed criminals, is like registering virgins to stop prostitution."