Andy, although I have not tried it with my TS200/TM-D700 combo yet, my question would be, why not put a dual bander antenna on the TS2000 also in place of the monobander UHF antenna that you must have to pull this off as you have stated? Would seem that you could then have the best of both worlds in the mobile AND at the BASE ...
Keep us posted on your results, should not be any reason you cannot do it as described, albeit there may be some delays that could cause some digital issues with FLdigi. Are you planning on any form of ARQ? John - KE5HAM --- In digitalradio@yahoogroups.com, "obrienaj" <andrewob...@...> wrote: > > I am planning on attempting to access a local 2M FM repeater that has started > using FL-digi for a digital mode net. Since I do not have a 2M antenna at > home other than the dual-band 2M/70cm mobile antenna on my car, I thought I > might try the Sky Command capabilities that my rigs have. Anyone already done > this and perhaps have the set-up files that can be shared ? > > This would involve operating from my shack with PC and Kenwood TS2000 , using > a UHF simplex frequency to transmit to my vehicle in the drive-way. In the > vehicle a Kenwood D700A would pick up the UHF simplex transmission and link > it to the 2M side of the DM700A for access to the 2M repeater. > > If someone does have the files all set for this, could you let me know (or > upload to the files section here) , it would save me a lot of manual > searching and eye squinting. > > Andy K3UK >
