Patrick, for the procedures i described, I am not using the SDR Direct part of Multipsk, just the usual Multipsk with 3kHZ waterfall.
Andy K3UK On Fri, Mar 19, 2010 at 1:54 PM, Patrick Lindecker <f6...@free.fr> wrote: > > > Hello Andy, > > > > It is really Commander that performs the band changes , then Multipsk > with > > the decode. > However, there is a possibility to scan directly 4 frequencies from > Multipsk > (in the "Transceiver" window) using of course Commander. > > > > So far, these two days of band scanning have only captured PSK31 signals > > via the Panoramic feature. It has not captured any >RSIDs. I am not sure > > if that is because there were NO RSIDs transmitted on the frequencies I > > was scanning, or if the RS-ID >decode does not work in Multipsk when > > Panoroamic is enabled. I will do some more testing tomorrow as I check > > the > If the Panoramic is started, the (SdR) RS ID does not work. I must see this > > point... > > 73 > Patrick > > ----- Original Message ----- > From: "obrienaj" <k3uka...@gmail.com <k3ukandy%40gmail.com>> > To: <digitalradio@yahoogroups.com <digitalradio%40yahoogroups.com>> > Sent: Friday, March 19, 2010 2:36 AM > Subject: [digitalradio] Re: WARC band scan results.. via Multipsk/Commander > > > > > --- In digitalradio@yahoogroups.com <digitalradio%40yahoogroups.com>, > "Francesco Piccone" <fpicc...@...> > > wrote: > >> > >> Dear Andy and puts on MultiPSK to perform this function ? > >> 73 > >> tnx > >> Frank > >> yv4gjn > > > > > > Frank, > > > > It is really Commander that performs the band changes , then Multipsk > with > > the decode. > > > > 1. Set Commander to scan specific frequencies (see "config" in Commander" > > 2. Set 'dwell" time in Commander to suit your needs (I used 120 seconds) > > 3. Launch Multipsk, press Commander button ,at bottom of Multipsk screen > > ,to link Commander and Multipsk for frequency information. > > 4. in Multipsk, activate PSK reporter DLL > > 5. In Multipsk, if interested in PSK data, choose PSK31 as the mode and > > then press "Panoromic" > > > > 6. When ready to look at the signals decoded and captured, examine the > PSK > > reporter window in MultiPSK, you will see things like.. > > 22:26 PJ2MI PSK31 18101701 > > 21:54 G3WXC PSK31 10140894 > > 21:54 PA0DY PSK31 10141361 > > 21:49 N7UF PSK31 18102092 > > > > So far, these two days of band scanning have only captured PSK31 signals > > via the Panoramic feature. It has not captured any RSIDs. I am not sure > > if that is because there were NO RSIDs transmitted on the frequencies I > > was scanning, or if the RS-ID decode does not work in Multipsk when > > Panoroamic is enabled. I will do some more testing tomorrow as I check > > the frequencies suggested by Rein. > > > > Andy K3UK > > > > > > > > ------------------------------------ > > > > > http://www.obriensweb.com/digispotter.html > > Chat, Skeds, and "spots" all in one (resize to suit)Yahoo! Groups Links > > > > > > > > > > >