When I read my follow-up, I get confused. I would not be surprised if anyone else also gets confused.
Its working, but I do not know why. de rudy from Kanuckistan --- In digitalradio@yahoogroups.com, "Rudy" <ben...@...> wrote: > > Followup. > > If I use the default devices of 1 and 6, it begins to receive and the > transmit goes to the sytem speaker. If I change default speaker (through > windows) to the Signalink port, then it seems to transmit. Of course then, > any system sounds are then ported to the radio. > > I think I even saw a G6xxx CQ this morning on 20 meters. > > Am I headed in the 'right' direction? WSPR was so easy. > > de rudy ve3bdr in kanuckistan. > > --- In digitalradio@yahoogroups.com, "Rudy" <benner@> wrote: > > > > I have the Signalink USB soundcard, actually I have 2 of them now. I have > > no problem using it with HRD, WSPR, full rig control. > > > > Comes time to use it on WSJT, I can get it to receive but only once. When I > > transmit, the Tx audio goes to the system speakers, in spite of not being > > configured to go there. Ok, no problem, close the app and restart. I then > > get a an error message and the program closes. Yes, VISTA. > > > > Here is the error message I get in the DOS window. > > > > ****************************************************************** > > WSJT Version 7.03 r1090 , by K1JT > > Revision date: 2009-03-03 11:03:26 -0500 (Tue, 03 Mar 2009) > > Run date: Mon Mar 22 09:40:38 2010 UTC > > > > Audio Input Output Device Name > > Device Channels Channels > > ------------------------------------------------------------------ > > 0 2 0 Microsoft Sound Mapper - Input > > 1 1 0 Microphone (2- USB Audio CODEC > > 2 0 2 Microsoft Sound Mapper - Output > > 3 0 6 Speakers (Realtek High Definiti > > 4 0 2 Realtek HDMI Output (Realtek Hi > > 5 0 2 Realtek Digital Output (Realtek > > 6 0 1 Speakers (2- USB Audio CODEC ) > > > > User requested devices: Input = 1 Output = 6 > > Default devices: Input = 0 Output = 2 > > Will open devices: Input = 1 Output = 6 > > Error opening input audio stream. > > Errortext: Invalid number of channels > > Number: -9998 > > Error opening output audio stream. > > Errortext: Invalid number of channels > > Number: -9998 > > ***************************************************** > > > > Is this another clueless newbie problem that has been addresses a gazillion > > times already? > > > > Can some kind soul please set me upon the path again? > > > > Rudy Benner VE3BDR in Kanuckistan. > > >
