On Wed, 2003-09-24 at 18:21, Billy Biggs wrote:
> >
> > I have a dvb-c card, and I'm using latest drivers from www.linuxtv.org
> > cvs. I think they are configured properly, since the video disk
> > recorder (vdr) works great, as does tvtime with eg. -D SDL output
> > option. What do you think, could it be a misconfig on my part?
>
> Well just based on your log, it kinda looks like you were using the
> linux-dvb driver instead of the new kernel-dvb driver or something like
> that maybe.
>
> I guess if it works with SDL and breaks with DirectFB, then there's
> something wrong in the DirectFB code. I admit that I never tested it
> and know of nobody who has, I just took the driver that Ville Syrjala
> wrote and put it in. It probably has some bugs. Patches appreciated :)
>
> -Billy
Whoops, actually I *was* using the older linux-dvb drivers when I got
the afore seen error messages. But the result is pretty much the same
with the new drivers also. I'll attach the output to the end of this
mail just in case.
But I understood from your previous mail, that someone, maybe you, might
be actually succesfully using the -D DirectFB option, is that correct?
juhis
bash:~# tvtime -D DirectFB
tvtime: Running tvtime 0.9.10.
config: Reading configuration from /usr/local/etc/tvtime/tvtime.xml
config: Reading configuration from /root/.tvtime/tvtime.xml
(*) parsing config file '/etc/directfbrc'.
---------------------- DirectFB v0.9.20 ---------------------
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2003 convergence GmbH
-----------------------------------------------------------
(*) Multi Application Core. (with MMX support) (2003-09-04 20:02)
(*) DirectFB/misc/memcpy: using MMXEXT optimized memcpy()
(*) DirectFB/InputDevice: Keyboard 0.9 (convergence integrated media
GmbH)
(*) MMX detected and enabled
(*) DirectFB/GraphicsDevice: Matrox G400/G450/G550 0.6 (convergence
integrated media GmbH)
(*) DirectFB/Layer: Enabled 'FBDev Primary Layer'.
(*) DirectFB/Layer: Enabled 'Matrox CRTC2'.
(*) DirectFB/Layer: Enabled 'Matrox Backend Scaler'.
station: Reading stationlist from /root/.tvtime/stationlist.xml
(!) [ 921: 3.596] --> Caught signal 11 (at 0x4, invalid address) <--
(!) [ 921: 3.603] DirectFB/core/fusion: (fusion_skirmish_prevail)
FUSION_SKIRMISH_PREVAIL --> Bad address
(!) [ 921: 3.603] DirectFB/core/fusion: (fusion_skirmish_prevail)
FUSION_SKIRMISH_PREVAIL --> Bad address
(!) [ 923: 3.604] DirectFB/core/fusion: (fusion_skirmish_prevail)
invalid skirmish
(!) [ 923: 3.604] DirectFB/core/fusion: (fusion_call_return) invalid
call
(!) [ 923: 3.604] DirectFB/core/fusion: (fusion_skirmish_prevail)
invalid skirmish
(!) [ 923: 3.604] DirectFB/core/fusion: (fusion_call_return) invalid
call
(!) [ 923: 3.604] DirectFB/core/fusion: (fusion_skirmish_prevail)
invalid skirmish
(!) [ 923: 3.604] DirectFB/core/fusion: (fusion_call_return) invalid
call
Segmentation fault
bash:~# tvtime -D matroxtv
tvtime: Running tvtime 0.9.10.
config: Reading configuration from /usr/local/etc/tvtime/tvtime.xml
config: Reading configuration from /root/.tvtime/tvtime.xml
(*) parsing config file '/etc/directfbrc'.
---------------------- DirectFB v0.9.20 ---------------------
(c) 2000-2002 convergence integrated media GmbH
(c) 2002-2003 convergence GmbH
-----------------------------------------------------------
(*) Multi Application Core. (with MMX support) (2003-09-04 20:02)
(*) DirectFB/misc/memcpy: using SSE optimized memcpy()
(*) DirectFB/InputDevice: Keyboard 0.9 (convergence integrated media
GmbH)
(*) MMX detected and enabled
(*) DirectFB/GraphicsDevice: Matrox G400/G450/G550 0.6 (convergence
integrated media GmbH)
(*) DirectFB/Layer: Enabled 'FBDev Primary Layer'.
(*) DirectFB/Layer: Enabled 'Matrox CRTC2'.
config tested and failed.
(!) [ 929: 2.636] DirectFB/core/fusion: (fusion_skirmish_prevail)
invalid skirmish
(!) [ 929: 2.636] DirectFB/core/fusion: (fusion_call_return) invalid
call
(!) [ 929: 2.636] DirectFB/core/fusion: (fusion_skirmish_prevail)
invalid skirmish
(!) [ 929: 2.636] DirectFB/core/fusion: (fusion_call_return) invalid
call
tvtime: Output driver failed to initialize: no video output available.
--
Info: To unsubscribe send a mail to [EMAIL PROTECTED] with
"unsubscribe directfb-users" as subject.
