Not sure if last email got to everyone so posting again. Hi,
I am running directfb on a sigma ref. (8654) board. All is fine, I can run the
example applications such as df_dok, df_window.
My
problem is that df_window, for example, or any other application does
not show the cursor. I can run df_window, see the windows. I can move
the mouse arbitarily and see that the 2 windows go in and out of focus
but no cursor.
Any ideas? What is the best applications to run to see a cursor?
I am not using directfbrc. I am using directfb 1.0.
The log is as follows:
tango3[share]# ./df_window --dfb:debug --dfb:cursor
(!) DirectFB/Config: Unable to open config file `/etc/directfbrc'!
(*) DirectFB/Config: Active DTV signal edid
(*) DirectFB/Config: Active DTV connector hdmi
(*) DirectFB/Config: Active Component standard hdtv60
(*) DirectFB/Config: Active Component signal 1080i
(*) DirectFB/Config: Active DTV connir: Enable NEC decoder (0x00000000)
ector ycrcb
(*)ir: Enable RC5 decoder (0x00000000)
DirectFB/Configir: Enable RC6 decoder
: Active Analog standard ntsc
(*) DirectFB/Config: Active Analog signal ntsc
(*) DirectFB/Config: Active Analog connector cvbs
(*) DirectFB/Config: Driver options file /mnt/dcchd/sigmadfbrc
(!) DirectFB/Config: Unable to open config file `/root/.directfbrc'!
(!) DirectFB/Config: Unable to open config file `/etc/directfbrc.df_window'!
(!) DirectFB/Config: Unable to open config file `/root/.directfbrc.df_window'!
=======================| DirectFB 1.0.0 |=======================
(c) 2001-2007 The DirectFB Organization (directfb.org)
(c) 2000-2004 Convergence (integrated media) GmbH
------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2009-09-28)
SYSTEM:ERROR:RUA splash screen clean up error 9
(!) System initialised
(*) Direct/Thread: Running 'EM86 Input' (INPUT, 955)...
(*) DirectFB/Input: EM86xx remote control 1.0 (SigmaDesigns)
(*) Direct/Thread: Running 'EM86 TCP Input' (INPUT, 956)...
(*) DirectFB/Input: EM86xx remote control over TCP/ 0.1 (SigmaDesigns)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 957)...
(*) DirectFB/Input: Primax Kensington SlimBlade Med 0.1 (directfb.org)
****************************************************************************
* *
* WARNING WARNING WARNING *
* *
* DCCHD logging is disabled! *
* To enable it define ENABLE_DEV_SUPPORT in the environment. *
* *
****************************************************************************
(!) Driver getting globals=0x414ff8
(*) DirectFB/Graphics: SMP863x Software Rasterizer 0.1 (Sigma Designs)
(*) Display params: -no_cp -component -f 1080i59 -cs yuv_709 -asp 16 9 -analog
-f NTSC_M -cs yuv_601 -asp 16 9
(!!!) *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect:
Parameters don't match any configuration; using d!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in
em86_get_analog_active_format()]
(!!!) *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect:
Parameters don't match any configuration; using d!
] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in
em86_get_analog_active_format()]
(*) SMP863x: HDMI Checker Thread running (pid=950)
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)
(*) Direct/Interface: Using 'FT2' implementation of 'IDirectFBFont'.
(!) IHDJPEGProvider: Probe() failed: JPEG header not found
(*) Direct/Interface: Using 'PNG' implementation of 'IDirectFBImageProvider'.
(*) Direct/Thread: Running 'PNG decode' (DEFAULT, 960)...
sglobals ok
pRUA ok
(!) IHDJPEGProvider: Probe() failed: JPEG header not found
Also I did the following:
tango3[directfb]# find . -name cursor.dat
./share/directfb-1.0.0/cursor.dat
./share/directfb-examples/cursor.dat
./share/cursor.dat
Thank you.
Homam.
Send instant messages to your online friends http://uk.messenger.yahoo.com _______________________________________________ directfb-users mailing list [email protected] http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
