Hi,

could you check that you have the file "/usr/share/directfb-1.0.0/cursor.dat
on your target file system.

regards.



On Mon, Oct 12, 2009 at 12:22 PM, Homam Dabis <[email protected]> wrote:

>  Hi,
>
> I am running directfb on a sigma ref. (8654) board. All is fine, I can run
> the example applications such as df_dok, df_window.
>
> My problem is that df_window, for example, or any other application does
> not show the cursor. I can run df_window, see the windows. I can move the
> mouse arbitarily and see that the 2 windows go in and out of focus but no
> cursor.
>
> Any ideas? What is the best applications to run to see a cursor?
>
> I am not using directfbrc. I am using directfb 1.0.
>
> The log is as follows:
>
> tango3[share]# ./df_window --dfb:debug
> --dfb:cursor
>
> (!) DirectFB/Config: Unable to open config file
> `/etc/directfbrc'!
> (*) DirectFB/Config: Active DTV signal
> edid
>
> (*) DirectFB/Config: Active DTV connector
> hdmi
>
> (*) DirectFB/Config: Active Component standard
> hdtv60
> (*) DirectFB/Config: Active Component signal
> 1080i
>
> (*) DirectFB/Config: Active DTV connir: Enable NEC decoder
> (0x00000000)
> ector
> ycrcb
>
> (*)ir: Enable RC5 decoder
> (0x00000000)
>
>  DirectFB/Configir: Enable RC6
> decoder
>
> : Active Analog standard
> ntsc
>
> (*) DirectFB/Config: Active Analog signal
> ntsc
>
> (*) DirectFB/Config: Active Analog connector
> cvbs
>
> (*) DirectFB/Config: Driver options file
> /mnt/dcchd/sigmadfbrc
>
> (!) DirectFB/Config: Unable to open config file
> `/root/.directfbrc'!
> (!) DirectFB/Config: Unable to open config file
> `/etc/directfbrc.df_window'!
> (!) DirectFB/Config: Unable to open config file
> `/root/.directfbrc.df_window'!
>
>
>      =======================|  DirectFB 1.0.0
> |=======================
>           (c) 2001-2007  The DirectFB Organization (directfb.org)
>
>           (c) 2000-2004  Convergence (integrated media)
> GmbH
>
> ------------------------------------------------------------
>
>
>
> (*) DirectFB/Core: Single Application Core.
> (2009-09-28)
>
> SYSTEM:ERROR:RUA splash screen clean up error
> 9
> (!) System
> initialised
>
> (*) Direct/Thread: Running 'EM86 Input' (INPUT,
> 955)...
> (*) DirectFB/Input: EM86xx remote control 1.0
> (SigmaDesigns)
> (*) Direct/Thread: Running 'EM86 TCP Input' (INPUT,
> 956)...
> (*) DirectFB/Input: EM86xx remote control over TCP/ 0.1
> (SigmaDesigns)
> (*) Direct/Thread: Running 'Linux Input' (INPUT,
> 957)...
> (*) DirectFB/Input: Primax Kensington SlimBlade Med 0.1 (directfb.org)
>
> ****************************************************************************
>
> *
> *
> *      WARNING               WARNING                   WARNING
> *
> *
> *
> *   DCCHD logging is disabled!
> *
> *   To enable it define ENABLE_DEV_SUPPORT in the environment.
> *
> *
> *
> ****************************************************************************
>
> (!) Driver getting
> globals=0x414ff8
>
> (*) DirectFB/Graphics: SMP863x Software Rasterizer 0.1 (Sigma
> Designs)
> (*) Display params: -no_cp  -component -f 1080i59 -cs yuv_709 -asp 16 9
> -analog -f NTSC_M -cs yuv_601 -asp 16 9
>  (!!!)  *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect:
> Parameters don't match any configuration; using d!
> ] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in
> em86_get_analog_active_format()]
>  (!!!)  *** WARNING [SMP863x: em86_get_analog_active_format_and_aspect:
> Parameters don't match any configuration; using d!
> ] *** [gfxdrivers/em86xx/em86xx_rules.c:1798 in
> em86_get_analog_active_format()]
> (*) SMP863x: HDMI Checker Thread running
> (pid=950)
>
> (*) DirectFB/Core/WM: Default 0.3 (directfb.org)
>
> (*) Direct/Interface: Using 'FT2' implementation of
> 'IDirectFBFont'.
> (!) IHDJPEGProvider: Probe() failed: JPEG header not
> found
> (*) Direct/Interface: Using 'PNG' implementation of
> 'IDirectFBImageProvider'.
> (*) Direct/Thread: Running 'PNG decode' (DEFAULT,
> 960)...
> sglobals
> ok
>
> pRUA
> ok
>
> (!) IHDJPEGProvider: Probe() failed: JPEG header not found
>
>
>
> Also I did the following:
>
> tango3[directfb]# find . -name
> cursor.dat
>
> ./share/directfb-1.0.0/cursor.dat
>
> ./share/directfb-examples/cursor.dat
>
> ./share/cursor.dat
>
>
> Thank you.
>
> Homam.
>
> Send instant messages to your online friends http://uk.messenger.yahoo.com
>
> _______________________________________________
> directfb-users mailing list
> [email protected]
> http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users
>
>
_______________________________________________
directfb-users mailing list
[email protected]
http://mail.directfb.org/cgi-bin/mailman/listinfo/directfb-users

Reply via email to