Jonathan, Thanks for your response. I can see the ch0rx signal toggling on my Basic RX in slot A using the following command u = usrp.source_c(0,decim_rate=8,fpga_filename="mytestfile.rbf") u._write_oe(0,0xffff,oxffff) # for enabling A side Basic RX u._write_fpga_reg(FR_DEBUG_EN, bmFR_DEBUG_EN_RX_A)
How do I modify the _write_oe command in order to output enable a Basic TX also on side A? If I use u._write_fpga_reg(FR_DEBUG_EN, bmFR_DEBUG_EN_RX_A | bmFR_DEBUG_EN_TX_A) it does not enable the Basic TX on side A. Thanks again for the help! Nirali > -----Original Message----- > From: Johnathan Corgan [mailto:[EMAIL PROTECTED] > Sent: Monday, November 05, 2007 10:46 AM > To: Nirali Patel > Cc: discuss-gnuradio@gnu.org > Subject: Re: [Discuss-gnuradio] I and Q samples out of FPGA receive chain > > On 11/2/07, Nirali Patel <[EMAIL PROTECTED]> wrote: > > > In the usrp_std.v file what signals do you recommend to look at the 16 > bits > > I and Q out of the HB filter of the receive_chain? > > Thanks again for you time and help. > > Nirali > > Use the ch0rx and ch1rx signals that go into the rx_buffer. > > -- > Johnathan Corgan > Corgan Enteprises LLC > http://corganenterprises.com/ _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio