Hello, I am currently working on a custom made SDR platform and trying to use gnu radio to program it. I understand that I need to write seperate source and sink blocks to receive and send I/Q samples from and to the device. I was wondering if anybody in the list could help me in understanding how to write these block. I suspect I would need to write something similar to the usrp code. Can you please let me know a starting point on how to write these blocks? The device I am currently using interfaces with the host using ethernet and sends/receives base band I/Q samples.
Are there documentations on interfacing gnuradio to SDR platforms other than usrp. It would be very helpful if you could give some pointers. -Anand ============================================ Anand Prabhu Subramanian Wireless Networking and Simulation Lab (WINGS) State University of New York, Stony Brook http://www.wings.cs.sunysb.edu/~anandps _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio