Hi, The current svn code does not seem to produce correct results for me when using usrp2_fft.py
I know there has been going on a lot of usrp2 work this weekend. Is the svn code still in a state of flux or should it work by now and should I check my setup. If I don't set the frequency I get a noise signal -85 dB. Setting the gain from the commandline does not seem to have any effect. usrp2_fft.py or usrp2_fftp.y -g 80 or usrp2_fft.py -g 0 I I do set the frequency using the commandline I get a nonsense signal at -120 to -180 dB. usrp2_fft.py -f 107.9e6 or usrp2_fft.py -f 107.9e6 -g 40 Until recently (before the needed firmware updates) everything worked fine. usrp2_fft.py -f 107.9e6 -g 40 used to show the spectrum of a local FM station. I use a USRP2 with a TVRX daughterboard. I do get the 2 green leds. I don't know if the problem is from (my build of) the new software firmware txrx.bin. I build on ubuntu 7.10 64 bit. Or maybe there are some changes in setting gain/frequency API which require changes in the usrp2_fft.py python script. Greetings, Martin _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio