Hrm, I just realized that I should clarify something: I can use UHD + E100 no problem. I have _not_ tested UHD + GNURadio + E100 recently.
Sorry for the confusion! Cheers, Ben On Thu, Feb 24, 2011 at 1:21 AM, Ben Hilburn <bhilb...@vt.edu> wrote: > I cannot comment on the Beagleboard, but using UHD on the E100 works > great for me. I have been using it reliably for the last few weeks. > I haven't rebuilt UHD in probably a week and a half or so, but I was > planning on doing that in the next couple of days using the next > branch. > > I'll let you know if I run into issues, but right now everything is > smooth sailing. > > Cheers, > Ben > > > On Wed, Feb 23, 2011 at 11:25 PM, Almohanad Fayez <alfa...@aol.com> wrote: >> I was wondering about people's experience with the UHD driver on the E100 or >> the Beagleboard. I am able to use it to receive IQ data from the USRP but I >> can't seem to transmit anything from it ... if I take the same flowgraph to >> a laptop I'm able to transmit IQ using the same USRP/daughterboard and the >> UHD driver however when I try to run the same transmitter on the Beagleboard >> and I check my spectrum analyzer I don't see anything >> >> I already did a signal capture before sending to the USRP and made sure that >> there is data getting pushed through ... is there a problem with UHD/USRP >> sinking on the E100 and the Beagleboard ??? I also made sure that I'm using >> the latest UHD firmware on the beagleboard. >> >> >> The following is the version info printed when I run the flowgraph: >> linux; GNU C++ version 4.5.3 20110214 (prerelease); Boost_104500; >> UHD_0001.20110224034946.1 >> >> >> thanks >> >> al fayez >> >> >> >> _______________________________________________ >> Discuss-gnuradio mailing list >> Discuss-gnuradio@gnu.org >> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> >> > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio