On 08/10/2011 09:13 AM, Brenden Smith wrote: > Hello list, > > I just burned the latest UHD firmware onto the SD card I am using with my > USRP2, and when I use the "uhd_find_devices" command I am told that no > devices are found. Previously I had been using the stock firmware and I > could find the USRP2 by using the 'find_usrps' command. When I use the > 'uhd_find_devices' command the orange light on the Ethernet port (on the > USRP2) lights up briefly and then nothing happens. When I boot up the device > I get a sequence of three LEDs lighting up then a flash and the right bottom > two light remain lit. Any help with this matter would be appreciated. >
http://www.ettus.com/uhd_docs/manual/html/usrp2.html#setup-networking http://www.ettus.com/uhd_docs/manual/html/usrp2.html#communication-problems http://www.youtube.com/watch?v=REDK7M-83WQ -josh > Thank you, > Brenden > > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
