Joana - I am not familiar with the software you are using or the radio you are using to transmit, so I can't help on that end.
Again, have you tried plotting the samples you are taking, either on an FFT or a Scope, to see what you are getting? What analysis have you done on your samples to figure out what is happening, and what have you discovered? It will be impossible for anyone to help you if all we know is "this is my flowgraph and the samples aren't right". To get good help, you really need to start investigating stuff, and sharing information you find in hopes that someone will recognize what might be happening. Cheers, Ben On Fri, Jul 27, 2012 at 2:59 AM, Joana Gonçalves < joana.goncal...@tekever.com> wrote: > Hello, **** > > ** ** > > I am using the HM-TRP-433D radio to transmit a word or a letter depending > what I program. Attached is the radio configuration.**** > > I can’t decode what is in file and why is sending that data. **** > > I think that I have something wrong on the quadrature demod block or I > need to filter the noise or something cause the file is getting much more > samples that I was expected.**** > > Thank you very much for your help**** > > ** ** > > ** ** > > ** ** > > *De:* Ben Hilburn [mailto:b...@ettus.com] > *Enviada:* quinta-feira, 26 de Julho de 2012 20:12 > *Para:* Joana Gonçalves > *Cc:* Discuss-gnuradio@gnu.org > *Assunto:* Re: [Discuss-gnuradio] FSK Modulation**** > > ** ** > > Jo -**** > > ** ** > > You'll need to provide more details. You are clearly dumping the data to > a file, but what is wrong with the samples? Have you plotted the samples > in your file and confirmed that it at least looks how you expect it to? > Are you getting the number of samples you expect? Is it the right data > type?**** > > ** ** > > You'll need to do some more investigating and provide more details for us > to be able to help you.**** > > ** ** > > Cheers,**** > > Ben**** > > ** ** > > On Thu, Jul 26, 2012 at 10:26 AM, Joana Gonçalves < > joana.goncal...@tekever.com> wrote:**** > > Hello, I am trying to use GRC to demodulate FSK signal. I use the USRP1 to > receive data from the radio and I can see when the radio is transmitting or > not trough FFT Sink. The problem is that I need to copy to a file what the > radio is sending and I can t receive the correct data . I attached my block > diagram. **** > > I'm looking forward to your helpful.**** > > **** > > Regards**** > > Jo**** > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio**** > > ** ** >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio