I am getting the following output..
karan@karan-laptop:/usr/local/bin$ uhd_usrp_probe --args
"addr=192.168.10.2"
linux; GNU C++ version 4.4.3; Boost_104000; UHD_003.005.000-8-g49193c85
Error: LookupError: KeyError: No devices found for ----->
Device Address:
addr: 192.168.10.2
how i connected the setup is I powered my usrp n200 with the power
cord. I connected an ethernet cable from usrp ethernet port to a
gigabit ethernet switch and from the switch i am connecting an
ethernet cable to my laptop's ethernet port.I also tried to connect
the ethernet cable directly from usrp to my laptop. .It didn't change.
Is it ok if ifconfig eth0 says Rx packets as 0?
Have you changed the FPGA/Firmware on the device? Are you sure that
your host ethernet port isn't being managed by Netmanager with DHCP support?
That will screw up up.
Have you tried a different Ethernet cable?
Is your laptop ethernet port 1GiGe capable?
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
