On 04/23/2014 09:07 AM, Antonio Petrolino wrote:
Hi,
I'm using a USRP N210 and I need a 10 MHz reference clock. From
ettus.com I got:
"
Ref Clock - 10 MHz
Using an external 10 MHz reference clock, a square wave will offer the
best phase noise performance, but a sinusoid is acceptable. The
reference clock requires the following power level:
USRP2 5 to 15 dBm
N2XX 0 to 15 dBm
"
So in my case (N210) I should have a minimum 0 dBm signal.
Can someone confirm this information (N2XX 0 to 15 dBm) for N210? The
bad news for me is I have a -15dBm 10 MHz available...
Thank you,
Antonio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Yup, the minimum is 0dBm.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
