Please help me with this. Thanks.
Regards, -monika On Wed, Apr 27, 2016 at 4:37 PM, monika bansal <monika19...@gmail.com> wrote: > Hi, > > I have connected benchmark_tx.py and benchmark_rx.py to make it loopback > mode without USRPs. There is no channel block between the tx and rx chain. > > I checked all blocks in the Transmit chain. All are working as expected. > But in Receiver chain i did not understand the output of *ofdm_sync_ml *and > *digital.ofdm_sampler * blocks. > > I tried checking the output of port 1 of ofdm_sync. The sync signal is one > on the following indexes: > * 714, 7109, 13515, 19911, 26308, 32705, 39115, 45515,* > * 51910, 58315, 64715, 71115, 77515, 83915, 90315, 96712,* > * 103115, 109512, 115910, 122315, 128715, 135113, 141510, 147915,* > * 154288, 160711, 167112, 173515, 179912, 186315* > > I checked the output of port 1 of ofdm_sampler. The sync signal is one on > the following indexes: > *0, 5120, 10752, 15872, 20992, 26112, 31744, 36864,* > * 41984, 47616, 52736, 57856, 62976, 68096, 73216, 78336,* > * 83968, 89088, 94208, 99840, 104960, 110080, 115200, 120832,* > * 125952, 131584, 136704, 142336, 147456, 153088* > > *I expected the output of *port 1 of ofdm_sync to be 639, 639+6400, > 639+12800 , ... > and output of port 1 of ofdm_sampler to be 0, 5120, 5120*2, 5120*3, .... > > General parameters are as follows: > fft_len = 512 > cp_len = 128 > occupied_tones = 200 > modulation = bpsk > pkt_size = 200 bytes > after CRC and Header pkt_length = 209 bytes > 1 sync word for each packet > > Finally there will be 10 OFDM symbols per pkt and 512+128 = 640 complex > symbols per OFDM symbol. > >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
