Hi,
on a Kubuntu 16.04 system building gnuradio from source fails. Branch is
master, downloaded right now.
UHD is also the latest version from right now.
Any ideas what it could be? Here the output:
[ 99%] Built target _trellis_swig1
[ 99%] Building CXX object
gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
[ 99%] Built target _trellis_swig0
[ 99%] Built target pygen_gr_uhd_swig_08777
[ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
[ 99%] Built target pygen_gr_vocoder_swig_43253
[ 99%] Built target _video_sdl_swig
[ 99%] Built target _vocoder_swig
[ 99%] Built target pygen_gr_fcd_swig_c4332
[ 99%] Built target _fcd_swig
[ 99%] Built target pygen_gr_wavelet_swig_89b19
[ 99%] Built target _wavelet_swig
[ 99%] Built target pygen_gr_wxgui_swig_78659
[100%] Built target _wxgui_swig
[100%] Built target pygen_gr_zeromq_swig_4d7be
[100%] Built target _zeromq_swig
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, PyObject*,
PyObject*):
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:
error: class uhd::usrp::dboard_iface has no member named set_gpio_debug
(arg1)->set_gpio_debug(arg2,arg3);
^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, PyObject*,
PyObject*):
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:
error: class uhd::usrp::dboard_iface has no member named set_gpio_debug
(*arg1)->set_gpio_debug(arg2,arg3);
^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
void init_uhd_swig():
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:
error: ATR_REG_IDLE is not a member of uhd::usrp::dboard_iface
ant(d, "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int
>(uhd::usrp::
^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:
error: ATR_REG_TX_ONLY is not a member of uhd::usrp::dboard_iface
(d, "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::
^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:
error: ATR_REG_RX_ONLY is not a member of uhd::usrp::dboard_iface
(d, "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::
^
/home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:
error: ATR_REG_FULL_DUPLEX is not a member of uhd::usrp::dboard_iface
"dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int
>(uhd::usrp::
^
gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for target
'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' failed
make[2]: ***
[gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error 1
CMakeFiles/Makefile2:15016: recipe for target
'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
Makefile:160: recipe for target 'all' failed
--
Ralph A. Schmid
Mondstr. 10
90762 Fürth
+49-171-3631223
ra...@schmid.xxx
http://www.bclog.de/
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
