On 05/21/2017 01:27 AM, li...@lazygranch.com wrote: > FWIW, I just compiled 0e32fca on opensuse. It builds just fine, but > I'm failing all the polar tests. Yeah I have scipy installed. I'll > start a new thread on that when I've totally given up debugging. But > the code on that rev is buildable on my PC.
I have no idea what 0e32fca is - looks like an arbitrary hex tag - but if the tests in gr-fec are failing it's most likely because development version of gsl wasn't installed - or it's the wrong version. Can you simply install gsl and be on your merry way? Unlikely. -- Cinaed > > > On Sun, 21 May 2017 08:13:28 +0200 > "Ralph A. Schmid, dk5ras" <ra...@schmid.xxx> wrote: > >> This is also my experience, I made exactly this, deleting the build >> dir, make a new one, fresh cmake, and so on. >> >> Ralph. >> >> >>> -----Original Message----- >>> From: li...@lazygranch.com [mailto:li...@lazygranch.com] >>> Sent: Saturday, 20 May, 2017 20:50 >>> To: Ralph A. Schmid, dk5ras; 'Kostis Triantafyllakis'; >>> discuss-gnuradio@gnu.org Subject: Re: [Discuss-gnuradio] Building >>> gnuradio master fails >>> >>> Be that as it may, I have noticed that the first "cmake../", that >>> is a fresh directory, produces different output than a "make clean" >>> followed by "cmake ../". I've made it a point to do a "rm -r >>> build". >>> >>> By output, I means whatever is written to standard output. I don't >>> know if a fresh directly effects the actual build or not. >>> >>> Original Message >>> From: Ralph A. Schmid, dk5ras >>> Sent: Saturday, May 20, 2017 11:32 AM >>> To: 'Kostis Triantafyllakis'; discuss-gnuradio@gnu.org >>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails >>> >>> Hi, >>> >>> Forgot to mention that of course I already did so - with no >>> success... >>> >>> Ralph. >>> >>>> -----Original Message----- >>>> From: Kostis Triantafyllakis [mailto:ctri...@csd.uoc.gr] >>>> Sent: Saturday, 20 May, 2017 18:19 >>>> To: Ralph A. Schmid, dk5ras; discuss-gnuradio@gnu.org >>>> Subject: Re: [Discuss-gnuradio] Building gnuradio master fails >>>> >>>> Hello, >>>> >>>> Cleaning (or even deleting the whole build directory) before >>>> rebuilding, had helped me in similar cases. >>>> Maybe you could give it a try >>>> >>>> Best, >>>> Kostis >>>> >>>> >>>> On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote: >>>>> Hi, >>>>> >>>>> on a Kubuntu 16.04 system building gnuradio from source fails. >>>>> Branch is master, downloaded right now. >>>>> >>>>> UHD is also the latest version from right now. >>>>> >>>>> Any ideas what it could be? Here the output: >>>>> >>>>> >>>>> [ 99%] Built target _trellis_swig1 >>>>> [ 99%] Building CXX object >>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o >>>>> >>>>> [ 99%] Built target _trellis_swig0 >>>>> [ 99%] Built target pygen_gr_uhd_swig_08777 >>>>> [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9 >>>>> [ 99%] Built target pygen_gr_vocoder_swig_43253 >>>>> [ 99%] Built target _video_sdl_swig >>>>> [ 99%] Built target _vocoder_swig >>>>> [ 99%] Built target pygen_gr_fcd_swig_c4332 >>>>> [ 99%] Built target _fcd_swig >>>>> [ 99%] Built target pygen_gr_wavelet_swig_89b19 >>>>> [ 99%] Built target _wavelet_swig >>>>> [ 99%] Built target pygen_gr_wxgui_swig_78659 >>>>> [100%] Built target _wxgui_swig >>>>> [100%] Built target pygen_gr_zeromq_swig_4d7be >>>>> [100%] Built target _zeromq_swig >>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: >>>>> In >>>> function >>>>> ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, >>>>> PyObject*, PyObject*)’: >>>>> /home/ras/gnuradio/build/gr- >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15: >>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named >>> ‘set_gpio_debug’ >>>>> (arg1)->set_gpio_debug(arg2,arg3); >>>>> ^ >>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: >>>>> In >>>> function >>>>> ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, >>> PyObject*, >>>>> PyObject*)’: >>>>> /home/ras/gnuradio/build/gr- >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16: >>>>> error: ‘class uhd::usrp::dboard_iface’ has no member named >>> ‘set_gpio_debug’ >>>>> (*arg1)->set_gpio_debug(arg2,arg3); >>>>> ^ >>>>> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: >>>>> In >>>> function >>>>> ‘void init_uhd_swig()’: >>>>> /home/ras/gnuradio/build/gr- >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91: >>>>> error: ‘ATR_REG_IDLE’ is not a member of >>>>> ‘uhd::usrp::dboard_iface’ ant(d, >>>>> "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int >>>>>> (uhd::usrp:: >>>>> ^ >>>>> /home/ras/gnuradio/build/gr- >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94: >>>>> error: ‘ATR_REG_TX_ONLY’ is not a member of >>>>> ‘uhd::usrp::dboard_iface’ (d, >>>>> "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int >>>>>> (uhd::usrp:: >>>>> ^ >>>>> /home/ras/gnuradio/build/gr- >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94: >>>>> error: ‘ATR_REG_RX_ONLY’ is not a member of >>>>> ‘uhd::usrp::dboard_iface’ (d, >>>>> "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int >>>>>> (uhd::usrp:: >>>>> ^ >>>>> /home/ras/gnuradio/build/gr- >>>> uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98: >>>>> error: ‘ATR_REG_FULL_DUPLEX’ is not a member of >>> ‘uhd::usrp::dboard_iface’ >>>>> "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< >>>>> int >>>>>> (uhd::usrp:: >>>>> ^ >>>>> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for >>>>> target >>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' >>> failed >>>>> make[2]: *** >>>>> [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] >>> Error >>>> 1 >>>>> CMakeFiles/Makefile2:15016: recipe for target >>>>> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed >>>>> make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2 >>>>> Makefile:160: recipe for target 'all' failed >>>>> >>>>> >>>>> >>>>> -- >>>>> >>>>> Ralph A. Schmid >>>>> Mondstr. 10 >>>>> 90762 Fürth >>>>> +49-171-3631223 >>>>> ra...@schmid.xxx >>>>> http://www.bclog.de/ >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> Discuss-gnuradio mailing list >>>>> Discuss-gnuradio@gnu.org >>>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>>> >>> >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >> > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
