Hi, This issue is resolved after restarting the USRP device.
Thanks Ayaz From: Ayaz Mahmud<mailto:[email protected]> Sent: Tuesday, July 31, 2018 12:38 PM To: [email protected]<mailto:[email protected]> Subject: [Discuss-gnuradio] Installation error for USRP N200 Hi, I have already been using two USRP B210 over Gnuradio 3.7.10.1 which works perfect. Now I am trying to bring in a N200 USRP, and installing it. 1. I can ping the IP 192.168.10.2/24 from my PC 192.168.10.1/24 2. I can also detect all the 3 devices with “uhd_find_devices” 3. When I run “uhd_usrp_probe” it gives error: Please update the firmware and FPGA images for your device. See the…. Please run: “/usr/local/lib/uhd/utils/uhd_images_downloader.py” “/usr/local/bin/uhd_image_loader –args=”type=usrp2,addr=192.168.10.2” 1. I have run both the above command, 1st command says that all the targets are up to date and the 2nd command erases and re-wrights the firmware. But then returns the same error for “uhd_usrp_probe”. Can you please let me know if I am doing anything wrong here and how should I fix it? Thanks, Ayaz
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
