On 07/31/2018 02:38 PM, Ayaz Mahmud wrote:
Hi,
I have already been using two USRP B210 over Gnuradio 3.7.10.1 which
works perfect.
Now I am trying to bring in a N200 USRP, and installing it.
1. I can ping the IP 192.168.10.2/24 from my PC 192.168.10.1/24
2. I can also detect all the 3 devices with “uhd_find_devices”
3. When I run “uhd_usrp_probe” it gives error:
Please update the firmware and FPGA images for your device. See the….
Please run:
“/usr/local/lib/uhd/utils/uhd_images_downloader.py”
“/usr/local/bin/uhd_image_loader –args=”type=usrp2,addr=192.168.10.2”
4. I have run both the above command, 1^st command says that all the
targets are up to date and the 2^nd command erases and re-wrights
the firmware. But then returns the same error for “uhd_usrp_probe”.
Can you please let me know if I am doing anything wrong here and how
should I fix it?
Thanks,
Ayaz
Did you power-cycle the N210 after you updated the firmware image? The
firmware is loaded at boot time into the SRAM of the FPGA.
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
