Hmmm ... well the current UHD API for "set_auto_dc_offset" is "(bool, size_t)".
Looks like the generated Python from gr-ieee-80211 is "set_auto_dc_offset("",
0)", which isn't compatible with the current UHD API for this method.
Hmmm ... here's my best bet: gr-ieee802-11 uses the GR-provided GRC blocks
(whether XML or YML). Guessing you're using some reasonably recently (e.g.,
2019) GR 3.8-tech-preview commit. If that's the case, then here's what seems to
be the issue ... In this commit <
https://github.com/gnuradio/gnuradio/commit/4804d1fdb6950d2b2ec5707cd8a362f01ed2cf90
>, then file "gr-uhd/grc/gen_uhd_usrp_blocks.py" was dramatically changed to
generate the YML required by the 3.8 GRC. The API for "set_auto_dc_offset" was
removed entirely ... not sure why ... but somehow GRC when "compiling" the
flowgraph from YML into Python generates that command improperly.
You said you used PyBOMBS to install everything ... yes? The UHD is the current
GIT master, so bleeding edge LOL.
Any way you can figure out which commit of GNU Radio and gr-ieee-80211 were
used? The latter was recently updated such that the GIT master corresponds to
GR 3.8, while "main-3.7" is for the current GR "maint-3.7" branch ... - MLD
On Thu, Jun 27, 2019, at 12:59 PM, sumit kumar wrote:
> Sure I will try that, meanwhile any tip on the other issue, i.e.,
>
> *TypeError: in method 'usrp_source_sptr_set_auto_dc_offset', argument 2 of
> type 'bool'*
> **
> Regards
> Sumit
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
