Another quick update: I went to the folder "usr/lib/uhd/examples" and ran the
command
./benchmark_rate --args "type=b200" --rx_rate 10e6
I received the following response:
[INFO] [UHD] linux; GNU C++ version 11.2.0; Boost_107400; UHD_4.1.0.5-3
[INFO] [B200] Loading firmware image: /usr/share/uhd/images/usrp_b200_fw.hex...
[00:00:00.000130] Creating the usrp device with: type=b200...
[INFO] [B200] Detected Device: B200mini
[INFO] [B200] Loading FPGA image:
/usr/share/uhd/images/usrp_b200mini_fpga.bin...
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Setting master clock rate selection to 'automatic'.
[INFO] [B200] Asking for clock rate 16.000000 MHz...
[INFO] [B200] Actually got clock rate 16.000000 MHz.
Using Device: Single USRP:
Device: B-Series Device
Mboard 0: B200mini
RX Channel: 0
RX DSP: 0
RX Dboard: A
RX Subdev: FE-RX1
TX Channel: 0
TX DSP: 0
TX Dboard: A
TX Subdev: FE-TX1
[00:00:05.824708634] Setting device timestamp to 0...
[INFO] [B200] Asking for clock rate 40.000000 MHz...
[INFO] [B200] Actually got clock rate 40.000000 MHz.
[00:00:06.131725232] Testing receive rate 10.000000 Msps on 1 channels
[00:00:16.182022312] Benchmark complete.
Benchmark rate summary:
Num received samples: 100493863
Num dropped samples: 0
Num overruns detected: 0
Num transmitted samples: 0
Num sequence errors (Tx): 0
Num sequence errors (Rx): 0
Num underruns detected: 0
Num late commands: 0
Num timeouts (Tx): 0
Num timeouts (Rx): 0
Done!
