Hi everybody,
I am experiencing an issue and I wanted to share it with you to see if anybody would be able to suggest some solution for me. I hope this is right forum. If not, please let me know. I have been running NexentaStor 3.1.2 based on Illumos SunOS 11 on IBM x3650 with Perc e/e controller with DELL MD1000 direct attached storage. I had no issues with this setup. When I tried to upgrade to NexentaStor 4.0.2 I hit the issue when OS can see through Perc 5/e RAID controller only a single logical volume from the storage. Basically all the devices are detected but disabled by Fault Management Facility (check the boot log). Because disk devices for other logical volumes are retired, I cannot access data on them but megacli utility can see all the logical volumes configured. As soon I boot from 3.1. 2, I have no issues to see all the logical volumes again. I tried to reset/repair indicated faults, but when I reboot they come back right away. So far I have no solution or work-around for this problem. I prvided URLs to relevant log files and the output of fmdump and fmadm utilities. I hope that somebody can point me into right direction to solve the issue. Thank you in advance for your input and time spent reading it. Here the the copies of log files: boot log http://pastebin.com/z4dRYr57 fmdump -ev output http://pastebin.com/CQq9dbKC megacli output http://pastebin.com/ADQ9kH3W fmdump, fmadm output http://pastebin.com/mPfp8nC5 = ------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
