Could get back on this problem only now... Tried disabling hald, then simulated a disconnect (the machine is remote for me...) through cfgadm -cdisconnect and -cunconfigure, then again -cconfigure, but no way. Though it's recognized by the system, disk is not taken in the disk device list from commands like "format", "format -e", "rmformat": it's not linked. Should I really ask someone to phisically disconnect it and reconnect? Da: Eric Sproul A: [email protected] Gabriele Bulfon Data: 16 maggio 2014 22.07.45 CEST Oggetto: Re: [discuss] usb 3 disk On Mon, May 12, 2014 at 4:08 AM, Gabriele Bulfon via illumos-discuss [email protected] wrote: /var/adm/message shows: May 12 08:44:38 xstreamserver usba: [ID 912658 kern.info ] USB 2.10 device (usb480,a00d) operating at hi speed (USB 2.x) on USB 2.0 root hub: storage@2, scsa2usb0 at bus address 2 May 12 08:44:38 xstreamserver usba: [ID 349649 kern.info ] TOSHIBA External USB 3.0 2318412917AC May 12 08:44:38 xstreamserver genunix: [ID 936769 kern.info ] scsa2usb0 is /pci@0,0/pci15d9,d880@1a,7/storage@2 May 12 08:44:38 xstreamserver genunix: [ID 408114 kern.info ] /pci@0,0/pci15d9,d880@1a,7/storage@2 (scsa2usb0) online I want to create a zpool on it for backups, what device should I use? Why not showing on format? Try disabling hald: svcadm disable svc:/system/hal:default If hald is running it latches on to removable devices and causes them not to show up in things like format(1M). Eric
------------------------------------------- illumos-discuss Archives: https://www.listbox.com/member/archive/182180/=now RSS Feed: https://www.listbox.com/member/archive/rss/182180/21175430-2e6923be Modify Your Subscription: https://www.listbox.com/member/?member_id=21175430&id_secret=21175430-6a77cda4 Powered by Listbox: http://www.listbox.com
