Hello,I tried the below suggestion of using BSD boot media and resync. Dropped
into a shell Using a FreeBSD 11 install DVD and tried the below commands after
installation of Dilos 2:# dd if=/dev/zero of=/dev/ada1Let it ran for 1 minute
and hit Ctrl-C. Here ada1 is the disk which contained the dilos install.#
syncSync completed within 10 seconds.When I rebooted the entire disk ada1 was
wiped clean. Just to refresh, I get the below screen during first boot
from hard disk after install:https://pasteboard.co/HstyCuG.pngAlso in the
installed loader, beadm command is missing as shown in the below
screenshot:https://pasteboard.co/HstDr26.pngDoes anyone in the illumos
community have any idea on how to resolve these issues? Or does the FreeBSD
based new illumos bootloader work only on select hardware,perhaps before Intel
skylake ?ThanksKarthikFrom:
"karthik"<[email protected]>Sent: Tue, 31 Jul 2018
21:12:20To: <[email protected]>Subject: Re: [discuss] BSD Loader
issuesHello,I tried the below suggestion of using BSD boot media and resync.
Dropped into a shell Using a FreeBSD 11 install DVD and tried the below
commands after installation of Dilos 2:# dd if=/dev/zero of=/dev/ada1Let it ran
for 1 minute and hit Ctrl-C. Here ada1 is the disk which contained the dilos
install.# syncSync completed within 10 seconds.When I rebooted the entire disk
ada1 was wiped clean. Just to refresh, I get the below screen during first
install from hard disk after install:https://pasteboard.co/HstyCuG.pngAlso in
the installed loader, beadm command is missing as shown in the below
screenshot:https://pasteboard.co/HstDr26.pngDoes anyone in the illumos
community have any idea on how to resolve these issues? Or does the FreeBSD
based new illumos bootloader work only on select hardware,perhaps before Intel
skylake ?ThanksKarthikFrom: Mayuresh Kathe <[email protected]>Sent: Wed,
04 Jul 2018 16:11:57To: illumos-discuss <[email protected]>Cc:
[email protected]: Re: [discuss] BSD Loader issuesOn 2018-07-03
07:14 PM, karthik wrote:> Hello,>> I had wiped out the partitions of
Windows 10 & Ubuntu via> format+fdisk. Then setup a custom zpool based
on the instructions> given in the below email thread:>>
https://lists.omniti.com/pipermail/omnios-discuss/2017-November/009402.html>>
I also tried the whole disk option in the OmniOS CE installer, it> simply
installs to an EFI partition. In this case also, after install> bsd loader
failed to load the OS, simply throwing up the same error> "start not
found" and displaying the OK prompt.>> I don't know what to do
further for resolving this. May be the issues> reported for the BSD loader
in 2017 are yet unresolved.>> Thanks> Karthik>> From: Oscar del
Rio <[email protected]>> Sent: Tue, 03 Jul 2018 20:33:46> To:
[email protected]> Subject: Re: [discuss] BSD Loader issues>>
On 07/ 1/18 02:56 PM, karthik wrote:>>>> On my desktop system
recently, I wiped out a Windows 10/Ubuntu> 16(MBR) dual>> boot setup
so that I can install(via DVD), an illumos distribution> in their>>
place.I first tried OmniOS CE(latest stable release) and then Dilos>
2.Both>> have an option of installing onto a custom zpool named rpool,so
I> installed>> in this manner.After install in both cases,the BSD
loader fails to> boot the>> OS, just displays an error "start not
found" as shown in the below> link:>>
https://pasteboard.co/HstyCuG.png [1]>> Try removing the partitions
before installing.> In the Illumos installer, open a shell or single-user,
then "format" +> "fdisk"> to remove the
partitions.> The installer should then use the whole disk(s) for the zfs
rpool.Here's something you could also try;Boot off some BSD boot media,
drop into a shell, issue; "dd if=/dev/zeroof=/dev/<your_hdd>"
and let it run for a minute or so before hitting"Ctrl+C". Once done,
issue "sync", let it run it's course, then issue areboot and boot
off your illumos distro. There's a high chance this willdo the trick for
you.~Mayuresh
------------------------------------------
illumos: illumos-discuss
Permalink:
https://illumos.topicbox.com/groups/discuss/Tc3f8b2500e96bed8-M463f27ef7e3e57a3902e217b
Delivery options: https://illumos.topicbox.com/groups/discuss/subscription
