I am not authoritative at all, but i remember someone saying that they
thought a sub panel would be useful?


Anyway, I have a 16 circuit panel available; (possibly more if you get
those "2 breakers in 1/2 inch" breakers). If someone calls for it, it will
be available; If it is not needed, I'll throw it out when we are done with
the electrical project.

Keep in mind, that there is a 1 meter 3-dimensional clearance tolerance on
a sub panel in winnipeg building code, so it might require either placing
it high (like 8 feet off the ground), or in the classroom or something.

On Mon, Sep 3, 2012 at 7:05 PM, Michael Loney <maikerulo...@gmail.com>wrote:

> The goal is to completely remove the old panel and come all new.
>
> G Mike
> On Sep 3, 2012 7:04 PM, "chris kluka" <asd...@asdlkf.net> wrote:
>
>> Wait, we need MORE than 16x15 amp circuits on a SUB panel?
>>
>> My intention with this panel was to have a 100 or 200 amp line come out
>> of the main panel (we already have) and daisy-chain to this panel, giving
>> an alternate location for circuits to route to...
>>
>> do we need more than 16 circuits on a sub panel? are there that many
>> circuits in an area away from the main breaker box that a 16 circuit sub
>> panel would not be useful?
>>
>> (its entirely possible, i'm just surprised).
>>
>> On Sun, Sep 2, 2012 at 7:21 PM, Michael Loney <maikerulo...@gmail.com>wrote:
>>
>>> Yes thanks!
>>>
>>> Sadly the label we need will be much bigger to handle our needs.
>>>
>>> G Mike
>>> On Sep 2, 2012 6:40 PM, "Justin Lacko" <jus...@takaji.ca> wrote:
>>>
>>>> It appears to be far too small for our needs - we were going to
>>>> install something like a 32/64 subpanel in the workshop area.
>>>>
>>>> If someone else has a use for it though...
>>>>
>>>> On 2 September 2012 18:36, Roswyne <rosw...@gmail.com> wrote:
>>>> > You are excellent for thinking of this!
>>>> >
>>>> > On Sep 2, 2012 5:13 PM, "Chris Kluka" <asd...@asdlkf.net> wrote:
>>>> >>
>>>> >> Well, my only thought is that i have no idea what code is or what
>>>> 'kind'
>>>> >> of panel this is, or if it meets code. All i know is that it has 100
>>>> amp
>>>> >> service and it is about 5 years old. We had a new panel installed 5
>>>> years
>>>> >> ago when we went from 60 to 100 amp mains.
>>>> >>
>>>> >> Either way, i guess ill try to recover it.
>>>> >>
>>>> >> Also, I'm going to try to get my hands on the KwH meter that
>>>> measures our
>>>> >> cabin's power usage. I don't know if we 'own' it or if it is
>>>> property of MB
>>>> >> Hydro. (my gut feeling is that they own it, but probably will be
>>>> willing to
>>>> >> disown it if i ask for it when they come to disconnect the mains as
>>>> i can't
>>>> >> imagine them reusing a meter. They probably only ever install new
>>>> ones.
>>>> >>
>>>> >> Sent from my iPhone
>>>> >>
>>>> >> On Sep 2, 2012, at 4:59 PM, Colin Stanners <cstann...@gmail.com>
>>>> wrote:
>>>> >>
>>>> >> > I dont think we can turn down any free-panel offer.
>>>> >> >
>>>> >> > On Sun, Sep 2, 2012 at 4:21 PM, Chris Kluka <asd...@asdlkf.net>
>>>> wrote:
>>>> >> >> So, we are demolishing our cabin to free up the lot to build a
>>>> new one,
>>>> >> >> and i remembered something about possibly installing a new sub
>>>> panel or
>>>> >> >> something...?
>>>> >> >>
>>>> >> >> Anyway, the below pictured panel will be available in about 8
>>>> days if
>>>> >> >> anyone wants it, or if SkSp can use it as part of our rewiring
>>>> plans.
>>>> >> >>
>>>> >> >> I will be at my cabin until tomorrow, monday, if more information
>>>> is
>>>> >> >> needed (i.e. measurements, internal pictures, etc.).
>>>> >> >>
>>>> >> >> If some one says they need it, i will remove and salvage it prior
>>>> to
>>>> >> >> the demolition guys tearing everything down next weekend.
>>>> >> >>
>>>> >> >>
>>>> >> >>
>>>> >> >>
>>>> >> >>
>>>> >> >>
>>>> >> >>
>>>> >> >> I might not check email so call 9559072
>>>> >> >>
>>>> >> >> Sent from my iPhone
>>>> >> >> _______________________________________________
>>>> >> >> SkullSpace Discuss Mailing List
>>>> >> >> Help:
>>>> http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
>>>> >> >> Archive:
>>>> https://groups.google.com/group/skullspace-discuss-archive/
>>>> >> > _______________________________________________
>>>> >> > SkullSpace Discuss Mailing List
>>>> >> > Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
>>>> >> > Archive:
>>>> https://groups.google.com/group/skullspace-discuss-archive/
>>>> >> _______________________________________________
>>>> >> SkullSpace Discuss Mailing List
>>>> >> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
>>>> >> Archive: https://groups.google.com/group/skullspace-discuss-archive/
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > SkullSpace Discuss Mailing List
>>>> > Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
>>>> > Archive: https://groups.google.com/group/skullspace-discuss-archive/
>>>> _______________________________________________
>>>> SkullSpace Discuss Mailing List
>>>> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
>>>> Archive: https://groups.google.com/group/skullspace-discuss-archive/
>>>>
>>>
>>> _______________________________________________
>>> SkullSpace Discuss Mailing List
>>> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
>>> Archive: https://groups.google.com/group/skullspace-discuss-archive/
>>>
>>
>>
>> _______________________________________________
>> SkullSpace Discuss Mailing List
>> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
>> Archive: https://groups.google.com/group/skullspace-discuss-archive/
>>
>
> _______________________________________________
> SkullSpace Discuss Mailing List
> Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
> Archive: https://groups.google.com/group/skullspace-discuss-archive/
>
_______________________________________________
SkullSpace Discuss Mailing List
Help: http://www.skullspace.ca/wiki/index.php/Mailing_List#Discuss
Archive: https://groups.google.com/group/skullspace-discuss-archive/

Reply via email to