Yep Holding 1 is the xilink reset (you unplug it and hold 1 during boot so that you see "xilink reset" in the display )
Holding + ( add ) is the factory reset. Your SB3 should have firmware version 130 can bees seen in the web interface settings > information page If you rummage around in the setup menu of the SB3 (hold left arrow a while) You can set it to auto update firmware , note you can do that after you got it updated to one of never versions. Othervise an SB3 wants you to hold the brightness button to upgrade firmware For other readers, for future reference http://wiki.slimdevices.com/index.php/Hardware_Reset_commands If you get "weird" audio out of an squuezebox a xilink reset is usually the thing to do. -- Mnyb -------------------------------------------------------------------- Main hifi: SB3 (soon to replaced by a Touch :) It is on preorder) Bedroom/Office: Boom Kitchen: Receiver (soon to be replaced by my SB3 and the SBRto be stuffed in a box in the attic ) I use a Controller various ir-remotes and a Eee-PC with squeezeplay to controll this ------------------------------------------------------------------------ Mnyb's Profile: http://forums.slimdevices.com/member.php?userid=4143 View this thread: http://forums.slimdevices.com/showthread.php?t=72300 _______________________________________________ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss